0.57mm CU 4Pair F/UTP CAT6A 500MHZ Pass Test Ethernet LAN CABLE in 305M Drum

In the market day by day people are needing for higher bandwidth and lower latency in physical network infrastructure, thus leading to the high growing demand for higher performance CAT 6A cable . Cat6A cable not only deliver data upto 10 Gbase-T but also perform with a frequency up to 500MHZ.

F/UTP consists of 4/23AWG unshielded twisted-pair wires surrounded by an overall aluminum foil shield, with a center spline (or cross member) separating each pair.

F/UTP cables, which have very closely shielded individual pairs, provide superior crosstalk and EMI performance

SL solid cables are the best twisted-pair cables in the market for transmitting data over local area Networks (LANs). SL cables exceed performance requirements specified by the TIA/EIA-568B.2 / TIA/EIA-568C.2 and IEC 60603-7-4 standards.

SPECIFICATIONS

• Conductor Metal: Bare Copper
• Color Code: Gray (or OEM)
• Conductor: 23 AWG(0.57 ±0.01mm)
• Insulation Material: PE, OD: 1.30 ±0.10mm,
Average Thickness: 0.23 mm
• Jacket Material: LSZH (IEC 60332-1)
Average Thickness: 0.55mm nominal

FEATURES
• Complies with Cat6A Specifications
• 4 Pairs Foiled ( F/TP) Cable
• 23 AWG solid copper conductors with a frequency of 500 MHz
• Packaged in a MDF spools in a box

Ordering Information

Q1: Is it possible to customize our brand information on the cable?
A: Yes, we can print your brand name on the cable jacket and 3KM total cable length is requested.

Q2: Can you pass FLUKE test?
A: Yes, all SL networking cable can pass Fluke channel, component and permanent link test per customers' request.

Q3: What is your MOQ of your products?
A: We only have MOQ for some special jacket color, we request 3km as the total length of the bulk cable, you may consider stock
the bulk cable with us for your urgent order production.

Q4: Are free samples available from you?
A: Yes, we are always happy to offer the free samples for all of our customers' projects provided that the total cost is under
50 US dollars.

Q5: Do you accept OEM and ODM orders?
A: Absolutely yes, we have been doing OEM services since we start in this business, and for every single label, printing, bag
and carton design, we always treat it seriously and do it nicely. Our engineers can help you with your current design and even
can open the new tooling for your specific project.

Q6 : Are You Factory ?
A 6: Yes, our cable factory have 13 years production experience.