10G OEO Ethernet Media Converter Signal Repeater Easy Installation Simple Network Management
Overview
- GT-OEO series products are high-performance 10G optical signals Repeaters, realize the optical signal equilibrium amplification, clock extraction and plastic regeneration, extended optical signal transmission distance greatly.
- Using Optical - Electrical - Optical wavelength conversion and WDM (DWDM/CWDM) technology, cooperate WDM device can achieve optical signals transmit in a single fiber by single or multiple way over a long distance.
- Connection between fiber to fiber 10Gbps Ethernet equipment function as fiber mode converter ,or as fiber repeater for long distance transmission.
- Media converter for network backbone(SAN, LAN, MAN).
- Can be applied in Telecommunication room, R&D laboratory, Data center, and etc.
- 1310nm /1550nm/CWDM/DWDM Optical Wavelength Conversion.
Features
- Support 2U Rack (16 channel) and independent use
- support network management
- Support a WEB form and simple network management protocol SNMP mode. A WEB management can let user to allows monitor and manage the card status easily; Support SNMP unified network management platform
- support ITUT prescribed DWDM/CWDM wavelength transmission rate:9.95 Gb/s - 11.35 Gb/s
- Transparent Transport for data, less delay
- SFP module (Diagnostic Monitoring with), can detect light power change
- support Loopback test function
- support hot plugging
- state indicator light is complete
- Easy installation
- 3R function (balanced amplification, Timing Clock Obtaining , Shapping and regeneration), good dispersion management function, data transmission rippon at low.
Parameter and specifications
· Performance Data | · Technical Indexes |
· Equipment function | · 3R Repeater |
· Transmission Speed | · 10Gb/s ( 9.95Gb/s-11.35Gb/s ) |
· Protocols | · IEEE802.3ae (10Gbase-R/LRM) |
· Access Type | · 10G LAN/ 10G WAN |
· Interface Type | · A Type: SFP+ To/From SFP+ · B Type: SFP+ To/From XFP · C Type: XFP To/From XFP |
· Transmission Distance | · SFP+ module: Up to 40Km · XFP module: Up to 80Km |
· Maximum Packet · Forwarding Rate | · 14,880,950/S |
· Network management · information: | · • Card type information · • SFP+ or XFP fiber module detection · • SFP+ or XFP fiber module DMI function ( Temperature , Voltage , Optical power ) · • Link status detector · • Enable/Disabled Loopback test function · • Enable/Disable PRBS Generator and checker function · • Rate select ( 10Gbase-Lan or Wan ) · • Remote card's status monitor ( only in pairs ) |
· power requirement | · Rack-mountable : AC 85 ~ 220V OR DC -48V · Standalone: AC 220V OR -48V · Power consumption: ≤4W |
· Work Environment | · Operating Temp: 0~ 50 ℃ · Storage Temp: -10~ 70 ℃ · Humidity: 5%~90% ( non-condensing ) |
· Dimension | · Card : 11.5mm ( W ) × 78mm ( D ) · Standalone : 156mm ( W ) × 128mm ( D ) × 32mm ( H ) |
Typical Network Diagram and Application
SDH/SONET STM-64/OC-192,10G fiber channel,10G Ethernet, 10G CWDM/DWDM
