STM-16 Fiberhome Fonsweaver 780b 0.765 Kg Supports All Soh Bytes
The O2500 card is used as a line card in the system to implement the access and processing of one STM-16 optical interface service.
Provides one STM-16 optical interface.
Supports transparent transmission of overheads.
Supports the test on performance such as optical power, laser bias current and bit error.
Performs the multiplexing and demultiplexing of the signal.
Supports the SOH processing and supports all the defined SOH bytes (such as A1, A2, J0, B1, B2, S1, M1, H1, H2, H3, E1, E2, F1, D1 to D12, K1 and K2).
Supports monitoring of the higher order path overheads (such as J1, B3, C2 and G1).
Supports the equipment loopback and line loopback tests.
Supports the seamless switch between the active and standby clock and crossconnect cards.
Supports hot insertion at the optical interface.
Supports the automatic shutdown of the laser.
Supports the remote software upgrade.
The working principle of the O2500 card is shown as below.
The Optical Interface Specifications of the O2500-4 Card,
Item | Specification | ||
Optical Interface Type | S-16.1 | L-16.1 | L-16.2 |
Target distance (km) | 0 to 25 | 26 to 50 | 51 to 80 |
Source type | SLM | SLM | SLM |
Mean launched optical power (dBm) | -5 to 0 | -1 to 3 | -1 to 3 |
Central wavelength (nm) | 1260 to 1360 | 1530 to 1565 | 1530 to 1565 |
Minimum extinction ratio (dB) | 8.2 | 8.2 | 8.2 |
Receiving sensitivity (dBm) | -20 | -28 | -28 |
Overload point (dBm) | 0 | -9 | -9 |
Item | Specification | ||
Optical Interface TypeNote1 | V-16.2 | V-16.2+BA | U2-16.2+BPA2 |
Target distance (km) | 81 to 110 | 111 to 160 | 161 to 180 |
Source type | SLM | SLM | SLM |
Mean launched optical power (dBm) | 0 to 5 | 12 to 18 | 12 to 18 |
Central wavelength (nm) | 1530 to 1565 | 1530 to 1565 | 1530 to 1565 |
Minimum extinction ratio (dB) | 8.2 | 8.2 | 8.2 |
Receiving sensitivity (dBm) | -29 | -29 | -29 |
Overload point (dBm) | -9 | -9 | -9 |
Note 1: This configuration is applicable to G.655 fiber. For the G.652 fiber, a dispersion compensation unit should be configured (replacing BPA2 with BPD2). |
Item | Specification |
Weight (kg) | 0.765 |
Panel dimensions: H×W×D (mm) | 368×25×210 |
Item | Specification |
Power consumption (W) | 20 |