Fiber Optical Network Series E1/Ethernet/V.35/Serial RS232/485/422 Fiber Modem
Product Overview
PDH-based, Global Tech GP6 series Fiber Modem provides conversion between electrical and optical signals and transforms one V.35/Ethernet/E1/Serial RS232/485/422 signal on Single/Multi Mode Fiber. The user can customize the wavelength, connector and data bit rate, from 64kbps to 2,048kbps.
GP6 can transfer the in-band management info over different optical fiber link, and monitor and control the local and remote end units.
Features
- Support N* 64K, N=1~ 32, timeslot multiplexing. In framing mode, the local end can configure the remote end bit rate.
- Provided 3 types of loopback function, as ANA, DIG and REM, easily installation and maintenance.
- V.35 Fiber Modem can interwork with E1 Fiber Modem and Ethernet Fiber Modem directly, and save one E1/V.35 or E1/Ethernet converter cost.
- Standard SNMP management interface can monitor all local and remote end units through IP
Technical Parameters
Optical Interface
- Wavelength: 850nm, 1310nm, 1550nm
- Optical Fiber: Single Fiber, Dual Fiber
- Transmission Distance: 20/40/60/80/120 km
- Coding: NRZ(Not Return Zero)
- Connector: SC, FC
Ethernet Interface
- 10M/100M auto negotiation
- Full/half duplex auto negotiation
- Standard: IEEE 802.3, IEEE 802.1Q (VLAN)
- MAC Address Table: Up to 4096
- Ethernet Buffer: 64MBits SDRAM
- MDI/ MDIX auto negotiation
Application Diagram
