Fiber optic polishing machine

Fiber optic polishing machine is mainly used to process the fiber end face of the fiber optic products,

Such as fiber patch cord, pigtail, energy fiber, plastic optical fiber devices, embedded short ferrules and so on.

The in optical communication industry application is very wide, usually several optical grinding machine and curing oven end inspection instrument pressure tester machine and other equipment tools composed of one or more production lines, to production of optical fiber jumper, pigtail, embed short ferrule, passive devices.

Key Features:

1.Dual APC & PC polishing

2.Designed for high volume manufacturing

3. Accommodates most styles of connectors

4. Quick change tooling

5. APC back reflection as low as -70 dB UPC back reflection as

6. Insertion loss 0.2 dB typical

7. Super centering accuracy

8. Low undercut

9.Excellent connector endface polishing quality

10.Customized different Grinding fixtures

11.Material :2316 steel

12. And four corners is a good choose if want to get 3D end-face

Maintenance

In order to keep the machine in stable and normal status, should fulfill manitenance when the machine finish operating.

• After the machine finishes operating, or stop for certain time, must clean all polishing liquid completely, otherwise the liquid will get dry and leave hard stain, which will cause trouble for next polishing.
• If the machine keeps no running for long time, need clean the holder in ultra-sonic cleaner, then paste rusty-proof lubrication, stored in specified tooling box.
• The lifetime of polishing paper is varied on paper’s specification and polishing process.
• Should inspect lubrication status of moving parts and add lubrication periodly, advice maintenance of lubrication, rusty-proof paste with NLGIZ level lubrication monthly.
• Should inspect cooling fan, assure no stuck for dirt, clean dirt and stain over fan to keep smooth cooling system.
• Observe belt’s tension: Open box, will be able to see belt connected to gear moter, adjust motor-locating board’s position, vary belt tension. If found polishing plate is unable to rotate evenly or skid occur, then need tension the belt, but not over-tension that bring over-load to driving structure and big noise.
• Oberve lubrication under polishing plate, replace / add lubrication periodly.
• Protect the polishing plate and brass-ring from contamination and impact.