MachineU > China Products > Lights & Lighting > Professional Lighting > LED Fiber Optic Lights
40G SR4 MPO QSFP Multimode 100M 850nm Fiber Optic Transceiver
40G SR4 MPO QSFP Multimode 100M 850nm Fiber Optic Transceiver
40G SR4 MPO QSFP Multimode 100M 850nm Fiber Optic Transceiver
40G SR4 MPO QSFP Multimode 100M 850nm Fiber Optic Transceiver
Specifications
Brand Name :
YT
Model Number :
YT-FE2110A-25
Certification :
ISO, SGS, ROHS
Place of Origin :
china shenzhen
MOQ :
10 pcs
Price :
Negotiation
Payment Terms :
XTransfer T/T, Western Union, PayPal
Supply Ability :
5000 pcs/Month
Delivery Time :
3-7days
Product Name :
40G QSFP Transceiver
Distance :
100m
Wavelength :
850nm
Data Rate :
40Gb/s
Interface :
Single MPO Connector
Power Supply :
Single +3.3V
Description
QSFP 40G SR4 Fiber Optic Module , Sfp Transceiver Multimode 100M MPO 850nm
Description

40G QSFP PSM LR4 is a parallel 40Gb/s Quad Small Form-factor Pluggable (QSFP+) optical module. Itprovides increased port density and total system cost savings. The QSFP+ full-duplex optical module offers 4 independent transmit and receive channels, each capable of 10Gb/s operation for an aggregate data rate of 40Gb/s on 10km of single mode fiber.

An optical fiber ribbon cable with an MTP/MPO connector can be plugged into the QSFP+ module receptacle. Proper alignment is ensured by the guide pins inside the receptacle. The cable usually cannot be twisted for proper channel to channel alignment. Electrical connection is achieved through a z-pluggable 38-pin connector per MSA requirement.

Parameter

Package (Form Factor) QSFP+
Data Rate (typical) 10.3 Gbps/CH
Centre Wavelength 850nm
Distance 100m on OM3 MMF
Diagnostics Digital Monitor
Transmitter 4CH VCSEL Array Laser
Receiver 4CH PIN photo detector Array
TX Output Power (dBm) -7.5~+2.5
RX Sensitivity (dBm) -9.5
Low/High Case Temperature 0°C~70°C
Voltage Supply (typical) 3.3v
Connector MTP/MPO 8F MMF Without PI

Features

  1. 4 channels full-duplex transceiver modules
  2. Transmission data rate up to 10.5Gbps per channel
  3. 4 channels 850nm VCSEL array
  4. 4 channels PIN photo detector array
  5. Low power consumption <1.5W
  6. Hot Pluggable QSFP form factor
  7. Maximum link length of 100m on OM3 Multimode Fiber (MMF)and 150m on OM4 MMF
  8. Single MPO connector receptacle
  9. Built-in digital diagnostic functions
  10. Operating case temperature 0°C to +70°C
  11. 3.3V power supply voltage
  12. RoHS 6 compliant(lead free)

Specification
Parameter Symbol Min Typical Max Unit Notes
Transmitter
Center Wavelength λC 1270 1310 1350 nm 1
RMS Spectral Width λrms 3.5 nm 1
Average Launch Power, each lane PAVG -5.5 -0.5 +2.3 dBm
Optical Modulation Amplitude (OMA) POMA -4.5 -0.5 +3.5 dBm 1
Difference in Launch Power between any two lanes Ptx,diff 5.0 dB
Launch Power in OMA minus Transmitter and Dispersion Penalty (TDP), each Lane OMA-TDP -9.7 dBm 1
Rise/Fall Time Tr/Tf 50 ps
Extinction Ratio ER 3.5 dB
Relative Intensity Noise Rin -128 dB/Hz
Optical Return Loss Tolerance TOL 12 dB
Transmitter Reflectance RT -12 dB
Transmitter Eye Mask Margin EMM 10 % 2
Transmitter Eye Mask Definition {X1, X2, X3, Y1, Y2, Y3} {0.25, 0.4, 0.45, 0.25, 0.28, 0.4}
Average Launch Power OFF Transmitter, each Lane Poff -30 dBm
Receiver
Center Wavelength λC 1270 1310 1350 nm
Damage Threshold THd +3 dBm
Overload, each lane OVL +1 dBm
Receiver Sensitivity in OMA, each Lane SEN -12.5 dBm
Difference in Receive Power between any two Lanes (OMA) Prx,diff 5.0 dB
Signal Loss Assert Threshold LOSA -30 dBm
Signal Loss Deassert Threshold LOSD -15 dBm
LOS Hysteresis LOSH 0.5 6 dB
Optical Return Loss ORL -12 dBm
Receive Electrical 3 dB upper CutoffFrequency, each Lane Fc 12 GHz

Notes:

1. Transmitter wavelength, RMS spectral width and power need to meet the OMA minus TDP specs to guarantee link performance.

2. The eye diagram is tested with 1000 waveform.

FAQ

Q1. Can I have a sample order for this product?
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.

Q2. What about the lead time?
A:Sample needs 3-6 days, mass production time needs 1-2 weeks for order quantity more than

Q3. Do you have any MOQ limit for sample order?
A: Low MOQ, 1pc for sample checking is available

Q4. How do you ship the goods and how long does it take to arrive?
A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping are also optional.

Product tags

fiber optic converter rs485

,

rs485 to fiber optic converter

,

rs485 fiber optic converter
Send your message to this supplier
Send Now

40G SR4 MPO QSFP Multimode 100M 850nm Fiber Optic Transceiver

Ask Latest Price
Product Detail
Brand Name :
YT
Model Number :
YT-FE2110A-25
Certification :
ISO, SGS, ROHS
Place of Origin :
china shenzhen
MOQ :
10 pcs
Price :
Negotiation
Contact Supplier
40G SR4 MPO QSFP Multimode 100M 850nm Fiber Optic Transceiver
40G SR4 MPO QSFP Multimode 100M 850nm Fiber Optic Transceiver

Shenzhen Yutong Space Telecom Equipment Co., Ltd

Active Member
5 Years
guangdong, shenzhen
Business Type :
Manufacturer, Trading Company
Main Products :
Fiber Optic Cord, Fiber Optic Transceiver, Optical Fiber Module
Employee Number :
50~100
Certification Level :
Active Member
Discover similar products
View More

Find Similar Products By Category:

Supplier Homepage Products Fiber Optic Transceiver
MachineU China Products Lights & Lighting Professional Lighting LED Fiber Optic Lights
Contact Supplier
Submit Requirement