650nm 10mw transfer distance about 8-10KM VFL Pen Laser Type FP-LD Fiber optic cable red laser 3d visual fault locator
Introduction:
650nm visual fault locator has the function of fiber identification and faults locator of SM or MM fiber, it is a helpful
assistant to dead zone of OTDR, it is also a basic maintenance tool for fiber network, LAN, ATM fiber system and telecom network system.
Features:
--Support CW and 2Hz modulation work mode
--Solid: use special laser end design to avoid damage when dropping on the floor.
--Long working hours: use effective laser drive circuit to ensure 1mW/650nm locator can work more than 10 hours continuously.
--Stable power output: use special laser driver circuit, which can ensure stable power output in the low battery.
--2.5mm universal adapter: use 2.5mm universal adapter, can match SC/LC adapters.
Wavelength | 650nm±10nm |
Light source | FP-LD laser |
Output power | 1mw,10mw,20mw,25mW,30mW (optional) |
Connector | 2.5mm universal adapter |
Working mode | CW or 2Hz modulation |
Operating temperature | 0~+60 °C |
Storage temperature | -25~+70 °C |
Power | 2pcs AA battery |
Working hours | ≥10 |
Weight | 160g |
Dimension (mm) | 175*26*26 |