Optical Fiber Patch Cord (Jumper) is a length of optical fiber with two ends adding connectors to connect beam path. Pigtail is a length of fiber permanently attached connector only at one end. Yogel patch cords assembled with various types of connectors (such as FC, SC, ST, LC,MU,MTRJ etc.) There are three
kinds of polished fiber end-face: PC, UPC and APC .we employ advanced technique and equipment to
manufacture so as to ensure the high quality of mass production.
Connector | SC-ST | Jacket OD | 3.0mm |
Fiber Type | 62.5/125μm | Fiber Count | Duplex |
Polish Type | UPC to UPC | Jacket Material | PVC |
Insertion loss | ≤0.3dB | Interchangeability | ≤0.2dB |
Return loss | ≥50dB | Vibration | ≤0.2dB |
Minimum Bend Radius | 30mm | Storage temperature | -40~75°C |
Fiber Grade | G.652.D | Polarity | A(Tx) to B(Rx) |
Features:
Complies with IEC, Telcordia GR-326-CORE standard
Low insertion loss and high return loss
PC/UPC/APC polishing
Diameter:0.9, 2.0, and 3.0mm
Fiber jumper of the Single or multi mode is available
Simplex or duplex is available
PVC or LSZH fiber optical cable is available
Excellent changeability and repeatability
Tensile strength:10N
Operating temperature range:-40 to 80°C
Storage temperature range:-40 to 80°C
Color of fiber optic cable:Yellow (SM), Orange (MM), and Aqua (OM3)
Applications:
Local Area Network (LAN)
Data communication network
Telecommunication optical transmission network
Optical access network(OAN)
Active device termination
Fiber optics data transmission(FODT)
Test Equipment
CATV