FA-FDR1MD24B-SD,48 Fibers Slide Out Fiber Patch Panel With Rails And Front Board To Bear Pigtail

There are a wide variety of fiber optic patch panels, but in general, the main structure forms are as follows:

Rack type: a rack type fiber optic patch panel is to install multiple units on a rack, and each unit is an independent fiber distribution frame. This fiber patch panel not only retains the characteristics of the original small and medium-sized optical fiber distribution frame, but also provides the space utilization rate through structural deformation, which is a common structure in the early stage of the large capacity fiber optic patch panel. However, because of its inherent limitations in space, it is with some inconvenience in operation and use.

Drawing type: drawer type fiber optic path panel also divides a rack into multiple units, each of which consists of one to two drawers. When the fusion splicing and line tuning are carried out, the corresponding drawers are pulled out to operate outside the frame, it is with a larger operation space, so that each unit does not affect each other. The drawers have a locking device in both pulling out and pushing, which can guarantee the device is safe and reliable. Although the fiber optic patch panel cleverly provides large space for optical cable terminal operation, it is still not able to provide maximum convenience for optical connection line storage and placement as unit type. This fiber patch panel is one of the most popular forms at present.

Module type: modular structure is to divide fiber optic patch panel into many functional modules. Optical cable fusion, distribution line, connection line storage and other function operations are completed in each module. These modules can be assembled into a public rack according to needs. This structure provides the maximum flexibility to meet the needs of the communication network. The module type fiber optic patch panel with large capacity using panel and drawer and other unique structure, so that the optical fiber splice and wiring is more convenient; in addition, the vertical wire groove and a middle frame, effectively solves the storage problem for fiber optic pigtail. Therefore, it is the most popular type of large capacity fiber optic patch panel, but its current cost is relatively high.

The selection of optical fiber patch panel is an important and complex work. It should take full account of various factors according to local specific conditions. Based on careful understanding and repeated comparison, we can choose a best fiber optic patch panel to meet current needs and future development.

Product Features Of Rack Fiber Optic Patch Panel

The combustion performance of plastic parts meets the requirements of GB51697-85;

There is protective sleeve for optical fiber when it through metal hole, the bending radius of the fiber core and pigtail is greater than 37.5mm;

Bending radius of the optical cable enters the chassis is 15 times larger than the diameter of the optical fiber cable;

The metal shell is made of thickness 1.5mm cold rolled plate with epoxy plastic spray, beautiful appearance, easy to use;

With optical fiber cable fixation and protection device;

With optical cable terminal function;

With line adjusting function;

With protection function for optical fiber and fiber optic pigtail;

Suitable for medium and small wiring system like optical fiber to residential quarters, fiber to building, remote module Bureau and wireless base station and so on.

Main Parameters