FAPC-APAPM2M,Duplex SMA Fiber Optic Patch Cable With Metal Ferrule And 3.0mm Multi-Mode Cable

SMA fiber connectors are used in special occasions in optical fiber communication systems. Such as testing equipment, data networks, military equipment, medical equipment and so on. The SMA connector has two kinds of ferrule with different materials. One is ceramic and the other is metal. SMA905 and SMA906 is the most common in the metal one, and Fiberall is able to provide both and we not only can provide the common SMA patch cord with standard ferrule and spare parts, can also provide special SMA fiber patch cable with special ferrule with special outer diameter and inner diameter according to different customers’ needs. Meanwhile we also provide SMA to SMA fiber optic patch cords or SMA to other connector according to customer demand. Fiberall is good at fiber optic jumper production process and quality control management and we are able to fully meet different customized requirement.

Product Parameters

Advantages of Fiberall SMA Fiber Optic Jumper

1, High power SMA fiber jumper using air gap ferrule, it removes the energy absorbing materials near the fiber end, such as epoxy resin, coating materials and joints, making it ideal for high power applications. The ferrule is made of metal and acts as a heat sink, which rapidly transfers heat from the inside of the fiber. The damage threshold of the product varies with the firing conditions and the operating wavelength.

2, Each fiber optic jumper will pass through multi-channels detection during the process, including a large number of materials and optical detection. Extensive testing starts before production and runs through the entire manufacturing process to create outstanding quality.

3, Each fiber patch cord is provided with protective caps to prevent dust falling or other damage so the fiber end can be protected very well.