Industrial Power Over Ethernet POE Fiber Ethernet Switch 1 Gigabit FX + 8*10 / 100M TX PoE

Introduction

OFS-PE-GSF1DT8 switches 8-port Ethernet switches supporting PoE (Power-over-Ethernet) on ports 1 to 8. The switches are classified as power source equipment (PSE), and when used in this way, the OFS-PE-GSF1DT8 switches enable centralization of the power supply and provide up to 15.4 (30) watts of power per port. The switches can be used to power IEEE 802.3af/at compliant powered devices (PD), eliminating the need for additional wiring, and support IEEE 802.3/802.3u/802.3x with 10/100M, full/half-duplex, MDI/MDI-X auto-sensing to provide an economical solution for your industrial Ethernet network.

Features and Benefits

Ø 8 IEEE 802.3af/at-compliant PoE and Ethernet combo ports

Ø Up to 30 watts at 48VDC per PoE port

Ø Intelligent power consumption detection and classification

Ø Redundant dual VDC power inputs

Ø Support for OP-Ring (Recovery time<15ms) ,RSTP/STP/MSTP

Ø -20 to 50C operating temperature range (T models)

Ø Non-blocking store-and-forward shared-memory switch architecture

Ø MAC address:8K

Port Configuration

Ø RJ45 Port: Auto-negotiation, 10/100Base-T, Full/Half Duplex, Auto-MDI/MDIX, on copper cable of cat5# with operation distance of less than 100 meters.

Ø 1000Base-FX Optical Port: SFP module

Ø Single-mode:20, 40, 60, 80, 100,120Km,optional

Ø Multi-mode: 2, 5Km,optional

Ø Wavelength: 850nm, 1310 nm, 1550nm

Ø DOWNLOAD PROGRAM Port: Based serial network managem, RJ45

Ø Alarm output interface: One relay alarm output. Support power, port link and ring network alarm

Ø Indicator: Port link, ring fault/abnormity alarm indication 10M/100M Rate, run indication

Power Input options

Ø Input Voltage: 48V DC (46~57VDC) ,Redundant power input

Ø Overload Current Protection

Ø Support dual power backup

Environmental Limits

Ø -20℃ ~+50℃( Wide Temperature)

Ø Storage Temperature:-20℃ ～+75℃

Ø Humidity: 5%～95%

Mechanical Dimension

Ø Dimensions: 29 x 121 x 226 mm

Warranty

Ø 1 years