2 × 1.25G to 2.5G Gigabit Ethernet Media Converter , SFP to SFP
OFS-GAS-3
2×1.25G to 2.5G Gigabit Ethernet Multiplexer
The OFS-GAS-3 Gigabit Ethernet Multiplexer aggregates 2 port Gigabit Ethernet into 1 port 2.5G uplink, reducing the conversion CAPEX and increasing the fiber utilization effectively. The multiplexer can be used either in point-to-point topology fuctioning as a media converter for transporting two Gigabit Ethernet services over one fiber or in CWDM system working as a wavelength converter for extending the system’s transmits- sion capacity doubly. The multiplexer is equipped with three SFP-based ports: SFP1 is 2.5G uplink port, SFP2 and SFP3 are Gigabit Ethernet service ports.The multiplexer must be used in couples
Main Features
◆ Attach one 2.5G SFP module to SFP1 Cage on the Multiplexer. Attach two 1.25G SFP modules to SFP2 and SFP3 Cage on the Multiplexer.
◆ Link fiber from the SFP1 on one Multiplexer with SFP1 on another Multiplexer. It can link through CWDM system.
◆ Link fiber from the SFP2 and SFP3 on the Multiplexer to Gigabit Ethernet Service.
Note: SFP2 on one Multiplexer link pass only with SFP2 on another Multiplexer. SFP3 on one Multiplexer link pass only with SFP3 on another Multiplexer.
◆ Connect the power cord to the Multiplexer and check that the Power LED lights up. The Px LEDs will light when all the cable connections satisfactory.
Technical Specifications
Standerds | IEEE 802.3AB 1000Base-T1000Base-SX/LX/LH |
Fiber Cable |
Molti-mode: 50/125,62.5/125µm Single-mode: 9/125µm. |
Data Transfer Rate | 2.5Gbps for SFP1, 1Gbps for SFP2 and SFP3. |
LED Indicators | Power, P1 2.5G, P1 Link/Act, P2 Link/Act,P3 Link/Act |
Power Requirement | 220V(110-245V)AC,50Hz |
Ambient Temperature | 0 ~ 50℃ |
Humidity | 5% ~ 90% |
Dimensions | 26×70×93mm(H×W×D) |
Order Information
Model |
Product description |
OFS-GAS-3 |
Three ports Gigabit Ethernet Multiplexer with two 1.25G SFP ports and one 2.5G SFP port. |