FTTH Indoor 2.0mm PVC Single Mode SC UPC Fiber Optic Jumpers
1.Fiber Patch Cord Basic Introduction:
SC connectors on both ends, these SM jumpers are available in duplex configurations and utilize ceramic ferrules for precision and durability.
Geehe specifically controlled end-face geometry provides optimal physical contact by incorporating pre-polished and pre-radiused ferrules into the patch cords connectors. These features help ensure radius, apex offset and concentricity are tuned for greater mating reliability and optical insertion loss & return loss performance.
Fiber optic patch cables to connect network equipment in the data center, telecom room, and at the desktop.
2.Fiber Optic Patch Cord SC To SC
3.SC To SC Patch Cord Application:
4.Specification&Technology Parameters
Parameters | Value | ||||
Connector Type | LC/UPC,LC/UPC | ||||
Center Wavelength(nm) | 1310 or 1550 | ||||
Max.Insertion Loss(dB) | 0.3 | ||||
Min.Extinction Ratio(dB) | 23 | ||||
Min.Return Loss(UPC) (dB) | 50 | ||||
Min.Return Loss(APC) (dB) | 60 | ||||
Key Orientation | Slow Axis | ||||
Axis Alignment(deg) | ±3 | ||||
Operating Temperature(℃) | -20~+70 | ||||
Storage Temperature(℃) | -40~+85 | ||||
FIber Type | PM Panda Fiber |
* For Device with connector.IL is 0.3dB higher,RL is 5dB lower,ER is 2dB lower.
* The default connector key is aligned to the slow axis.
5. Fiber patch cord SC Specification& Technology Parameter:
Parameter | Unit | Index | |||
End-Face Type | PC | UPC | APC | ||
IL | dB | SM: ≤0.3;MM ≤0.1 | |||
Repeatability | dB | ≤0.1 | |||
interchangeability | dB | ≤0.2 | |||
RL | SM | dB | ≥50 | ≥50 | ≥50 |
MM | dB | ≥36(Without APC connector) | |||
Mating Times | >1000 | ||||
Operating Temperature | ℃ | -40~ +80 |
* EX:OFC-D-LA-LA-09-1-1.0
6. Ordering Information:
OFC | -X | -XX | -XX | -XX | -X | -X |
S: Simplex D: Duplex | SA:LC/APC SC:LC/UPC SP:LC/PC | SA:LC/APC SC:LC:UPC SP:LC/PC | 09:0.9mm 20:2.0mm 30:3.0mm | 0:G652D 1:G657A 2:50/125 3:62.5/125 4:others | 0.5:0.5m 1.0:1.5m 10:10.0m | |
Fiber Mode | Connector Type | Connector Type | Cable Diameter | Flange Type | Fiber Length |