Fiber Optic Test Equipment Pen Type Visual Fault Locator VFL 5mW
General information
Visual fault locator emits a bright beam of red light easily visible from a distance. Connect the VFL to one end of a fiber then locate that fiber at the other end, even if it one of many fibers either in a cable or terminated in a rack. Perform simple end-to-end continuity checks. Verify the proper polarity and orientation of fibers within a multi-fiber connector like the MT-RJ.
Visual fault locator can quickly illuminate fiber breaks, damaged connectors on patch cords, defective splices in splice trays, and tight fiber bends in and around equipment racks. The choice of a continuous wave output mode for steady fault illumination or a flashing output mode makes for easier fault location.
Applications
Features
Technical Specifications
Model | VFL650-2S | |||
Central wavelength | 650nm±10nm (635nm is available on request) | |||
Emitter type | FP-LD | |||
Output power | 5mw | 10mw | 20mw | 30mw |
Laser Range | ≥5KM | ≥10KM | ≥20KM | ≥30KM |
Optical connector | 2.5mm universal connector, for 1.25mm connectors, FC (Male)-LC. (Female) convertor can be provided on request | |||
Operating model | Both CW and Pulse available | |||
Pulse frequency | 2Hz to 3Hz/9Hz | |||
Power supply | 2AA alkaline batteries | |||
Battery | AA alkaline battery | |||
Operating temperature | -20°C to 60°C | |||
Storage temperature | -40°C to 85°C | |||
Dimension | Φ25 X 195 | |||
Weight | 100g (without battery) |
Standard Packages – Pen-type Visual Fault Locator
Model | Includes |
VFL-650-2S | Main unit, User Manual |
Fiber Optic Visual Fault Locator, Optical Fiber Visual Fault Locator, Handheld Fiber Visual Fault Locator, Bench-top Visual Fault Locator