Low insertion Loss Breakout Fiber Patch Cable 6 Core With FC Connectors
Breakout fiber optic cable is the cable each simplex with buffer design, independent strength member and sheath to prevent damage from environment and mechanical stress.
Breakout fiber optic patch cord is terminated connectors on this type of breakout cable. The inner diameter is usually 2.0mm or 3.0mm and the connectors can be chosen SC, FC, ST, LC, E2000 and so on.
FOC COMMUNICATION CO., LTD is the professional manufacture of fiber optic components. We produce the whole series fiber optic patc cord, including breakout cable patch cord, ribbon fan out patch cord, indoor armored patch cord, outdoor armored patch cord, waterproof patch cord, OM3 and OM4 patch cord.
1.Low insertion loss and high return loss
2.Good duplication and interchangeability
Application
1. Long distance trunk network
2. Metro area network
3. Access network
4. DWDM system
5. CATV optical fiber data network
6. Optical active device
Specifications
1 The min bending radius: 3.8 cm
2 Operating temperature range: - 40 ~ 85 °C
3 Connector materials: Ceramic ferrule
4 Min bandwidth: 200 MHZ. Km / 850 nm, 500 MHZ. Km / 1300 nm
5 Repeat plug: < 0.2 dB, each 500 times plug
6 Min reflection loss: 20 db
7 Max return loss:-50dB
Technical Test Data
Test item |
Test condition |
Wet-resistance |
Temperature:85ºC/relative humidity 85%/14days/insertion loss≤0.1dB |
Temperature change |
Temperature: -40ºC~+75ºC/relative humidity 10%-80% /42 repetitions/14days/ insertion loss≤0.1dB |
Water resistance |
Temperature: 43ºC, /PH5.5,/ 7days /insertion loss≤0.1dB |
Vibrancy |
Swing 1.52mm/frequency 10Hz~55Hz,/ X,Y,Z three directions:2 hours /insertion loss≤0.1dB |
Load bend |
0.454kg load/100circles insertion loss≤0.1dB |
Load torsion |
0.454kg load/10 circles insertion loss ≤0.1dB |
Tensility resistance |
0.23kg pull (nakedness fiber),1.0kg(with shell ) insertion≤0.1dB |
Strike |
High 1.8m,three directions ,8 in each direction/insertion loss≤0.1dB |
Reference standard |
Bellcore TA-NWT-001209 insertion loss≤0.1dB |
Rema Remark: The load bend and load torsion not suitable for 0.9mm patch cord or pigtail.
Ordering Information
1 Connector types: FC, SC, LC, ST, MTRJ, MU, MPO, DIN, D4, SMA
2 Ferrule End-face: PC, APC
3 Fiber Type: Single-mode (SM: 9/125um), Multimode (MM: 50/125um or 62.5/125um)
4 Cable Quantity: simplex, 6core, 12core, 24core
5 Cable Diameter: 3.0mm, 2.0mm, 0.9mm
6 Length:1, 2, 3 meter or customized length
7 Cable type: PVC, LSZH, OM3, OFNR, OFNP
Order Fiber Optic Patch Cord, Optical Fiber Patch Cord, Fiber Optic Assemblies, Fiber Jumpers