Smart IoT Box CCTV System Control Box intelligent IOT Box Free Management System
Technical Parameter
Operation and Maintenance | Data control | Main control board parameters | Flash:4GByte DDR: 512MByte CPU: ARM 600MHz |
Unauthorized unpacking monitoring alarm and video | Illegal unpacking alarm, video recording, and upload. |
Power failure alarm | DC12V power failure alarm AC220V mains power failure alarm |
Fan status monitoring alarm | Fan failure alarm Fan speed control |
Temperature detection alarm | Alarm temperature setting, Above the upper-temp limit, start the fan to dissipate heat; Less than the lower temp limit, start the chassis heating (The heating module needs to be purchased separately) |
Water leak detection alarm | Chassis flooding alarm |
Power monitoring alarm | Real-time alarm for mains over-voltage, under-voltage, lightning strike,short circuit fault |
Lightning protection frequency monitoring | Count lightning strike times to protect equipment installation and maintenance in advance |
Power consumption statistics | Real-time display of chassis voltage, current, power |
Output voltage / current control and monitoring alarm | DC12V output control and alarm AC24V output control and alarm AC220V output control and alarm PoE power output control and alarm |
System information display screen | Company LOGO Local management IP address Query / display the local I / O port status information Query / display the information of local voltage and current consumption. |
SMS alarm | The platform sends an alarm message SMS to the mobile phone of the operation and maintenance personnel |
Network transmission | PoE output network management | Delay start of power supply Scheduling of PoE operation and time PoE port real-time power viewing, PoE port power priority configuration PoE output power allocation, off& af &at |
PoE switch network management configuration | DHCP Serve, IGMP multicast Port mirroring, Port rate setting Network VLAN division Link aggregation, QoS configuration Network storm suppression MAC + VLAN + IP + port binding IPV4 / IPV6 dual stack protocol 802.1X access control, 802.3X flow control ERPS and spanning tree ring network networking, etc. |
Internet self-healing (Network watchdog) | Network traffic monitoring, offline recovery, downtime recovery, and storm recovery. |
Network monitoring alarm | Network port dropped alarm Optical port dropped alarm |
Device connection topology and status monitoring alarm | intelligent box connection topology Rename device name Custom topology design |
Expansion Module | Data control | 4G wireless transmission | 4G wireless communication function expansion and control |
Intelligent box heating | The automatic heating system is suitable for long-term low-temperature environment operation |
GPS positioning | Positioning accuracy ± 0.5 meters |
Local information storage | Specify or select local system information backup, local storage, provide accurate operation and maintenance information records |
Chassis repair lights | LDE Light when the box door is opened, providing lighting for smart box installation and maintenance. |
Chassis Protection | Case shell | Chassis protection level | IP55 |
Fan | 3200RPM |
Power supply air switch | AC220V/16A air switch |
Insect net | The ventilation holes are covered with insect nets to ensure the interior of the box is clear |
Product Overview
Intelligent Smart Box IoT is an intelligent power control system with high integration, strong functionality, and simple use and installation, independently. It adopts a frame structure, providing AC220V, AC24V, DC12V multiple sets of voltage output, detection, and remote control. Embedded high-performance, high-stability intelligent control unit core, which can realize the detection and centralized monitoring and management of equipment such as environmental variables, power information, data communication, and transmission in the power box, with rich interfaces and powerful functions
Features
▲ Built-in lightning protection module, air switch, input voltage detection, input voltage overload/underload alarm, lightning strike count indication.
▲ Modular design, centralized the power supply, automatic reclosing, voltage short circuit trip, self-recovery power supply. More than 1 set AC220V power output, 3 set DC12V output, 1 set AC24V output, 1 set DC52V output.
▲ Remote PoE power supply and management, multi-channel UTP network connection, fiber connection, link alarm, supporting optical fiber splice trays.
▲ Power failure detection, voltage, current monitoring, on-site recording and remote viewing of device name and model, voltage output, real-time reporting of detection results, positioning of equipment through cloud platform and online map.
▲ A mechanical lock is installed in the box to record the log of the door opening and closing operation personnel and time; tamper alarm, the user can set when the door is opened, the operation and maintenance platform actively alerts.
▲ The network management data is output through Ethernet, and the key data of operation and maintenance is transmitted through the optical fiber and the IoT transmission module, and transmitted through the 4th generation mobile communication technology and WIFI signals.
▲ Remote PoE power supply and management, multi-channel UTP network connection, fiber connection, link alarm, supporting optical fiber splice trays.
▲ Power failure detection, voltage, current monitoring, on-site recording and remote viewing of device name and model, voltage output, real-time reporting of detection results, positioning of equipment through cloud platform and online map.
Product picture

Packaging & Shipping
● All of our package are international standard package
● We will deliver our products as soon as the order confirmed
