28-port Managed Industrial Ethernet Switch with 4 10G SFP+ Slot and 24 10/100/1000Base-T(X) Ethernet Port
Technical Parameters
Interface | |
Fiber Port | 4*10G SFP+ Slot |
Ethernet Port | 24*10/100/1000 Base-T |
Manage Port | 1*RJ45 Console port |
Power connector | 4P Phoenix terminal, dual power supply redundancy,100-240VAC input |
LED Indicator | Power indicator: PWR (green); System indicator:SYS (green); Network indicator: Speed (green) Link (yellow), optical port L/A (green) |
Cable type and distance | |
Twisted pair cable | 0-100m (CAT5e, CAT6) |
Single-mode fiber | 20/40/60/80/100KM |
Multimode fiber | 550m/2KM |
Optical fiber interface | LC/SC |
Network topology & scale | |
Ring topology | Support |
Star topology | Support |
Bus topology | Support |
Tree topology | Support |
Hybrid topology | Support |
Electrical characteristics | |
Input voltage | DC36~72V/AC 100-240V 50-60HZ |
Power consumption | Non-POE full load (Total power) <70W |
L2 Features | |
Exchange capacity | 128G |
Packet forwarding rate | 95.23Mpps |
MAC address table | 16K |
VLAN support and quantity | Support 4K |
Report buffer | 12M |
Forwarding delay | <10us |
Port characteristics | Cross-connect and direct-adaptive |
Flow control | Support |
Jumbo frame support | Support 10Kbytes |
Spanning Tree Protocol | Support STP/RSTP/MSTP |
Ring network protocol | Support ERPS |
Link aggregation | Support 16 groups |
Multicast | Support IGMP Snooping |
Port mirroring | Support | |
Storm suppression | Support | |
Port traffic statistics | Support | |
Port flow system | Support | |
QINQ | Support | |
Protection | Shell: IP40 protection, aluminum alloy housing IEC 61000-4-5 Level 3 (4KV/2KV) (8/20us) IEC 61000-4-5 Level 3 (6KV/2KV) (10/700us) IEC 61000-4-3 Level 3 (10V/m) IEC 61000-4-4 Level 3 (1V/2V) IEC 61000-4-6 Level 3 (10V/m) IEC 61000-4-8 Level4 (30A/m) IEC 61000-4-11 Level3 (10V) EMI CLASS A IEC 61000-4-2 Level 4 (15KV/30KV) Free fall 0.5m | |
Convergence Service | ||
ACL | Support 500 ACLs; Support IP standard ACL; Support MAC extended ACL; Support IP extended ACL; | |
QoS | Support QoS re-marking and priority mapping; Support SP, WRR queue scheduling; Support entry speed limit and exit speed limit; Support flow-based QoS | |
Management function | ||
Command line | Support | |
Management serial port | Support | |
Telnet | Support | |
WEB management | Support | |
SNMP | Support SNMPv1/v2c | |
User management | Support | |
System log | Support | |
File upgrade | Support | |
Firmware upgrade | Support | |
SFP module DDM | Support | |
Environmental conditions | ||
Working temperature | -40℃~+85℃ | |
Storage/transport temperature | -40℃~+85℃ | |
Relative humidity | 5%~95% does not support condensation (non-condensing) | |
Cooling method | No fan design, natural heat dissipation | |
MTBF | 100,000 hours |
System Overview
Managed Industrial Ethernet Switch is a high performance, cost-effective high-end managed industrial Ethernet switch. The switch provides 24 10/100/1000Base-T(X) Ethernet port and 4 10G SFP+ slot. The use of a Ring technology (network fault recovery <20ms) the user can easily set the redundant ring network to increase network reliability, it also support WEB, CLI, Telnet/serial console, Windows utility, and SNMP management of a variety of ways, rich QoS features for data traffic control and management, support ring protocol, RSTP and STP Ethernet redundancy support port-based VLAN, IEEE 802.1Q VLAN and GVRP protocol.
Product Features
Product picture
Packaging & Shipping
● All of our package are international standard package
● We will deliver our products as soon as the order confirmed