1GE Xpon Gpon Onu For Fiber Optic Network FTTH USE Optical Interface SC / UPC Connector
Description:
Functional Feature:
Support EPON/GPON mode and switch mode automatically |
Support ONU auto-discovery/Link detection/remote upgrade of software |
Support Route PPPoE/DHCP/Static IP and Bridge mode |
Support IPv4/IPv6 dual mode |
Support Firewall function and IGMP multicast feature |
Support LAN IP and DHCP Server configuration |
Support Port Forwarding and Loop-Detect |
Support TR069 Remote Configuration and maintenance |
Specialized design for system breakdown prevention to maintain stable system |
Technical item | Details |
PON Interface | 1 GPON BOB (Bosa on Board) |
Receiving sensitivity: ≤-28dBm | |
Transmitting optical power: +1~+4dBm | |
Transmission distance: 20KM | |
Wavelength | TX: 1310nm, RX: 1490nm |
Optical Interface | SC/UPC Connector |
Chip Spec | RTL9601D ,CPU 300MHz,DDR2 32MB |
Flash | SPI Nor Flash 16MB |
LAN Interface | 1x 10/100/1000Mbps auto adaptive Ethernet interface. RJ45 connector |
LED | 4 LED, For Status of PWR,LOS,PON,LINK/ACT |
Push-Button | 2,For Function of Power on/off,Reset |
Operating Condition | Temperature: 0℃~+50℃ |
Humidity: 10%~90%(non-condensing) | |
Storing Condition | Temperature: -30℃~+60℃ |
Humidity: 10%~90%(non-condensing) | |
Power Supply | DC 12V/0.5A |
Power Consumption | <3W |
Dimension | 120mmx78mmx30mm(L×W×H) |
Net Weight | 0.13Kg |
Panel lights Introduction
Pilot | Status | Description |
PWR | On | The device is powered up. |
Off | The device is powered down. | |
PON | On | The device has registered to the PON system. |
Blink | The device is registering the PON system. | |
Off | The device registration is incorrect. | |
LOS | Blink | The device doses not receive optical signals. |
Off | The device has received optical signal. | |
LINK/ACT | On | Port is connected properly (LINK). |
Blink | Port is sending or/and receiving data (ACT). | |
Off | Port connection exception or not connected. |
Application