Fiber Optic Fusion Splice Protection Sleeves With 61mm Long For 24 Cores Fiber Optic Closure
Features
1. Top Quality, Far superior to other brand’s fiber fusion sleeve, it will hold up well over time.
The components used set it apart from cheaper fiber sleeves. Recovered Dia.2.4+/-0.1mm,
Whole length: 61+/-1mm.
2. The Preshrunk configuration design can make the single holed ends eliminates improper
fiber threading, and steel needle never fall out. Far better than ordinary one.
3. Clear sleeve make it easy to detect splice before shrinkage, Easily use and avoid any damages
to the optical fiber during installation.
3. Strength member is made from "Full hard" stainless steel of 304 high grade and is ground at
the edges before polishing to make it completely burr free to avoid rupturing during shrinking.
304 grade gives better corrosion resistance, even in coastal environment. Resistant to heat shocks,
no cracking dripping or flowing.
4. Top Quality and Super High Performance, Five years warranty.
Factory with Strength
The company has three advanced production lines, including steel rod production line,
plastic tube production line and automatic-assembly production line.the capability of
producing sleeves exceeds 200,000 pieces a day.
Production capability: 180,000 pcs per day
Payment: T/T, Western Union, others
Delivery: By Air via DHL, FedEx,UPS, TNT, EMS etc or By Sea.
Lead time: 5-7 days
Part No. | Spec. (mm) | Steel rod dia.(mm) | Outer tube L.(mm) | OD after shrinking (mm) | Inner tube L.(mm) | ID (mm) |
OFSS-40T | 1.5 * 40 | 1.5 | 40 | 3.0 | 40 | ≥1.2 |
OFSS-45T | 1.5 * 45 | 1.5 | 45 | 3.0 | 45 | ≥1.2 |
OFSS-60T | 1.5 * 60 | 1.5 | 60 | 3.0 | 60 | ≥1.2 |
OFSS-40T | 1.2 * 40 | 1.2 | 40 | 2.7 | 40 | ≥1.2 |
OFSS-45T | 1.2 * 45 | 1.2 | 45 | 2.7 | 45 | ≥1.2 |
OFSS-60T | 1.2 * 60 | 1.2 | 60 | 2.7 | 60 | ≥1.2 |
OFSS-40T | 1.0 * 40 | 1.0 | 40 | 2.5 | 40 | ≥1.2 |
OFSS-45T | 1.0 * 45 | 1.0 | 45 | 2.5 | 45 | ≥1.2 |
OFSS-60T | 1.0 * 60 | 1.0 | 60 | 2.5 | 60 | ≥1.2 |
Application: