CSM 300g 450g 600g E Glass Fiberglass Chopped Strand Mat For Boat Building

Glass fiber chopped strand mat(referred to as chopped strand mat) is the raw glass fiber filament cut into a 50mm long, randomly but equally distributed in the mesh belt, and spread power or emulsion binder by heating after curing bonding into chopped strand mat.

This non-woven mat is characterized by great combination of resin, easy processing, good wet strength retention, excellent laminate clear color, transparency.

Suitable applications of chopped strand mat is hand lay-up FRP like various sheets and panels, boat hulls, bath tubs, cooling towers, vehicles, automobile, chemical, electrical industries etc.

Performance Characteristic:

• Thickness uniformity, no hairiness, stains and debries.
• Coating and defoaming good performance.
• Quick permeation, high strength of the product, humid conditions less strength loss.
• Good wet-out, Easy to form, easy roll-out and air release.
• even thickness, low fuzz.
• Great resistance to watering and chemical agents, used in anti-corrosion applications.
• High tensile strength, suitable for filament winding or continuous laminating.
• Smooth laminate surface, transparency.

​

Data Sheet Of CSM450:

Useful Tips For CSM

The individual fibers that make up chopped strand mat is held together by an adhesive binder(powder/emulsion) that is designed to break down in polyester and vinyl ester resins.

How Much Resin Do I Need?

Fiberglass chopped strand mat requires approximately 1.5 to 2 times its own weight in resin for complete saturation (For example: 1LB chopped strand mat needs 1.5 to 2 LBS of resin). Most resins weigh about 9.5 LBS per gallon.

Weight: 100g/m2, 200g/m2, 300g/m2, 450g/m2, 600g/m2, 900g/m2

Width: 104cm-320cm

Roll Weight: 35kg

Picture: