Non-Stick PTFE Coated Fiberglass Open Mesh Conveyor Belt For Food Drying
Product Introduction
The PTFE coated mesh belt produced by our company is widely used in high temperature drying of screen printing and dyeing textiles. It provides a high proportion of open surface area, creating maximum airflow and full operation with minimal heat loss. The width and length of the belt remain stable over the entire operating temperature range.
Product Specification
Model | UPTMB-8090A |
Mesh Size | 4*4mm |
Materials | Fiberglass |
Thickness | 0.97mm |
Weight | 580g/m2 |
Temp. Resistance | -70℃~+260℃ |
Max Width | 4200mm |
Tensile Strength | 360/370N/5cm |
Features
1. Can be used at temperatures from -70 degrees to 260 degrees, with weather resistance and weather resistance. Under actual conditions, the high temperature of 260 degrees for 200 days will not only decrease, but the strength and weight will not decrease; if it is 120 hours at a high temperature of 350 degrees, the weight will only decrease by 0.6%. And keep the original soft.
2. Lubricating viscosity: It is difficult to adhere to any substance. All kinds of oil stains, stains or other adherent substances attached to its surface can be easily cleaned.
3. Resistant to the weather and chemical corrosion of strong acid, strong alkali, water and various organic solvents.
Application
1. Non-woven cloth dryer, textile printing machine, silk printing machine
2. Garment fabric shrink machine, high frequency ultraviolet dryer
3. Hot air dryer conveyor belt, all kinds of food baking, quick-freezing machinery
4. Paper glazing and waxing plant engineering oil machine
5. Separate hard plates
Pictures