3784 One Side Gray Silicone Coated Fiberglass Fabric 100g E-Glass
Introduce
Fiberglass base fabric that has been impregnated with our specially formulated silicone rubber compound. This silicone coating adds extended life, while providing greater oil and water resistance than uncoated fabrics as well as low smoke and flame retardation.
Data
Item | Technical Requirement | |
Thickness of raw fabric(mm) | 0.85 | |
Width(mm) | 1.0m,1.2m,1.5m | |
Length(m/roll) | 50m | |
Area Weight of raw fabric(g/m2) | 850 | |
Warp/weft yarn density(ends/cm) | 18x13±1 | |
Weaving structure | twill | |
Color of coating | gray | |
Area weight of silicon rubber coated(g/m2) | 100 | |
Total area weight after coated (g/m2) | 950 | |
Maximum heat resistance for base fiberglass fabric(ºC) | 550ºC | |
Maximum heat resistance for the silicon rubber coating(ºC) | 260ºC | |
Tensile strength (N/5cm) | warp | 2600N/5CM |
weft | 2400N/5CM |
-Excellent release properties
-High strength and tear resistance
-High dielectric strength
-High resistance to wear and flexing
-High chemical resistance, impervious to mild alkalies, non-oxidizing acids, most salts, mineral and lubricating oils, air, moisture and sunlight
-Operating temperature range from -50°C to +260°C
-Non-toxic odorless and tasteless
Pictures