FTTH Fiber Termination Box IP65, Wall Mounted 16 Ports Outdoor Fiber Optic Splitter Box Black

FDB0216G 16port termina box is widely used as a termination point for the feeder cable to connect with drop cable.The fiber splicing, splitting ,distribution can be done in this box,and meanwhile it provides solid protection and management for the fttx network building.Can be used indoor or outdoor .

Features

• Material:PC+ABS, wet-proof,water-proof,dust-proof,anti-aging, protection level IP65
• Clamping for feeder cable and drop cable, fiber splicing, fixation,storage,distribution all in one
• Cable,pigtails,patch cords are running through own path without disturbing each other ,cassette type SC/LC/PLC adaptor installation ,easy maintenance.
• Distribution panel can be flipped up, feeder cable can be placed in a cup-joint way, easy for maintenance and installation.
• Indoor and outdoor use
• wall mount or pole mount
• 2in ports, 16out ports
• pre install pigtails and adpater, plc splitter inside of box at factory is available.
• cable entry port can changed into express ports for uncut cable

Product Details

1. cable box front view, black, 2in 16out, wall mount at back,anti-thief waterproof lock and self-clip design. plastic material.

2. splice tray one side is for adapter and fiber storage, the other side is for splitter and fusion distribution

3. cable port and all box cover is with rubber seal for better waterproof, and sutiable for outdoor use.

there is fiber marking label and laser mark on the cover for on-site marking.

4. cable gland can replaced by express cable port(as the red marked black thing in the accessories),then the feeder cable can go through the box without cutting.

5. anti-thief waterproof lock and self-clip design.

6. Packing

Specification

1.Environmental requirement
Working temperature:-40℃~+85℃ Relative humidity: ≤85%(+30℃)Atmospheric pressure: 70KPa~106 KPa

2.Main technical
Insertion loss: ≤0.2dB
UPC return loss≥50 dB
APC return loss≥60 dB
Life of insertion and extraction: >1000 times

3. Thunder-proof technical
The grounding device is isolated with the cabinet, isolation resistance is less than 2x104 MΩ/500V(DC); IR≥2x104MΩ/500V

The withstand voltage between grounding device and cabinet is no less than 3000V(DC)/min, no punctre,no flash over;U≥3000V

Optical characteristics

Order information