Handheld Fiber Tool Kits Visual Fault Locator VFL 20MW 650nm SC FC ST 40 KM

Description

Pen-type light /laser pen is easy to operate,convenient to carry.It can be used to do visual test for fiber,

cable or connector. When the tested fiber have a breakage,the transmission laser will leak out at that

place,then you can know where the fiber damage is. This way is available for single mode or multimode.

It is one of the necessary fiber test tools for site operation worker and fiber maintenance personnel.

Our light pen advantage

1. light pen don’t have fiber coupling inside, so the fiber end face separate with fiber pen to avoid direct

contact (if direct contact, fiber pen end face is easy to dirty, should clean the fiber again).

2. sufficient power (1-50mW, no less than the power show on the label).

3. the housing is insulate, excellent anti-static effect.

Features

1. fiber breakage, bending fault locating;
2. OTDR dead zone fault checking;
3. end to end fiber identification;
4. optimization of mechanical splice point

Application

• Telecommunications
• Broadcasting CATV engineering and maintenance
• Integrated wring construction and maintenance
• Optical device production and research
• Other optical engineering

Specification

Usage steps

1. Take out of the product from the box and the cloth cover,check outer appearance,unscrew the

end cap, put in the battery subject to the sticker on the boot.

2. Screw the end cap,push the end lock switch and connect to the battery current.

3. Press the front mode select button.The first press,laser lit;the second press,laser strobe;the third

press,the laser off.

If test 1.25mm end face, you can buy optional our company 2.5-1.25mmadapter.

During test, please keep fiber end face and the product vertical direction, don’t swing around (if

necessary,use our company fixed adapter to fix the fiber head) so as not to damage the internal

ceramic sleeve. After test,please screw the protective cover.

4. When finish test, please press the end lock switch,shut off the battery current. New battery can

keep lighting for about 3-5hours(the higher the power,the shorter the using time).

Notice

If not used for a week, please take out of the battery in case of leakage and damage to the product.

Please do not disassemble the device, it will affect the warranty.