19” 24 Port SC Metal Drawer Sliding ODF Fiber Optic Patch Panel

24 Port SC Fiber Optic ODF Metal Drawer Sliding Fiber Optic Patch Panel 19”Rack Mount

GPSR series SC rack mount sliding fiber optic patch panels will be pre-loaded with the SC adapters and splice management kit at factory, it provides a mean to store the spliced optical fibers in a neat or orderly manner.

The main features of this rack mount patch panels is the metal sliding fusion tray which can be adjusted to various working angles to facilitate installation and maintenance works. Other than this, the rack mount patch panels have a front cover take off to support installation and maintenance works.

Specification

fiber pacth panel Features

• Applicable in the termination and 19' or 23” standard structure
• Rack mount in optical distribution frame ODF with mounting ears with holes
• Suitable for FC,SC,ST,LC,E2000 adapters on request
• 1.2mm Cold rolled steel sheet, with electrostatic spraying;
• Box size: 430*300*1U available, for cost save depth can be 250mm or 200mm;
• Metal sliding tray of the splice tray and bottom, easier and faster operation without open the cover, and take out for fiber management;
• Clip cover design, dust proof and whole box closed not in operation;
• 4 cable entry ports at back with rubber seal to prevent dust, each port with cable clamps and protection devices
• All the metal parts are stainless steel for long life span guarantee.

Sliding drawer patch panel ODF product details

The ODF can install max. 24pcs SC adapters and pigtails, it has cable clamps, nylon tie for fiber management, and around 1.5meter length fiber storage space, the metal slide tray make sure fiber management more easy and convinent; there will be mounting ears at both sides for 19inch rack mount.

There is total 4 pieces cable entry at back of the ODF with rubber seal for dust proof, the max. diameter is 20mm. Also after the cable enter, there will be plastic cable fixtion inside.

The ODF is totally 19inch, and have a front door with lock, on operation, just need open the lock then can draw the internal part out.

Each 24cores will have 1 piece of fusion splice tray with transparent cover, there is number mark on the cover for better management and sitribute. Each tray have 24 pcs heat shrink protection tube slots by 1 layer.

The adapter plate is fixed on the bottom with screws. we can use 12SC, 24SC 48SC, 96SC or 144SC adapters on customer request, ST FC LC or E2000 is avaialble. All the adapters will be fix on the adapter plate by screws too. Don't need to worry loss during transporation.

The box will be rack mounted on the optical disstribution frame, each mounting ears will equipped with 3pcs screws in the accessory bag.

Pack:1pc/individual cardboard box, in order to protect the box, will have foams at corners and plastic bag inside.

Accessory bag: heatshrink protection tube, nylon tie, mounting ear and screws, label mark, etc.

Pack information