SC UPC Plastic Field Installable Connector 5G 4G Single Mode Multi Mode

FTTH Drop Cable 2x3mm Optical Fiber SC UPC Field Assembly Fast Termiantion Connector 5G 4G Single Mode

The SC/APC fast connector are factory pre-polished, field-installable connectors that completely eliminate the need for hand polishing in the field. Proven mechanical splice technology ensuring precision fiber alignment, a factory pre-cleaved fiber stub and a proprietary index-matching gel combine to offer an immediate low loss termination to either single-mode or multi-mode optical fibers.

Specification

Pack Information:

1pc/plastic bag, 100pcs/inner box, 10pcs inner box/carton box

Product Details:

This fast connector use ceramic C-groove structure not plastic or metal, Insertion loss: the average ≤0.2dB, MAX≤0.4dB, Return loss: ≥50dB.

No need epoxy or polished, field-installable, factory embedded fiber

This connector is SC / UPC, cover type, total length 53mm, will have english user manual along with the shipment.

Apply to 2mm* 3mm or 2.0*1.6mm flat drop cable, which have fix jig. to hold the cable at the boot for both types of cable.

Boot is flip up and down type design, there is a black re-open tool for multiply use.

It is good sealing performance, flame retardant, and high quality plastic. All products with UPC flat ferrule, and with dust cap before delivery, and each with individual package.

How to use the fast connectors?

Process the fiber

1. Insert the drop cable into the stripper till 50-60mm out, and strip the cable strength layer

2. Press the stripped cable into the clamp, there are 4points to lock the fiber

3. Strip the cable coating layer by the insert the longitudinal fiber stripper to strip the coating of the fiber. Or use Miller stripper align of the fiber clamp.

4. Check the fiber by bending about 60°into direction if ok

5. Clean the fiber with alcohol cloth by 0°wipe and 90°again

6. Put the clamp into the length fixer till arrow up, and press to the end

7. Lay flat on the fiber cleaver slot, align to the end, and then cut the fiber

8. Finally the fiber length will be :19.4mm and 29.4±0.1mm,see picture

Assembly

Check the black locker

Insert the fiber along with the V entrance till fiber bend, but not higher than 1mm than V entrance

Keep housing, coating, and jig on the same level, take off the switch.

Dis-assembly

Assemble the auxiliary jig,fit on switch to the right end

Unlock the fiber

Use the exclusive convex to open the cover, unlock the shell

Raise 15°to pull out the fiber

Other Similar Types:

Application

• Premise environments
• Connections at the desk for LAN environments
• Patch panels
• Direct equipment termination
• Fiber to the Subscriber / Home (FTTH) applications
• Repair/replacement requirements
• Equipment test leads

2. Apply to 2mm* 3mm or 2.0*1.6mm flat drop cable

3. Ceramic C-groove structure not plastic or metal, good sealing performance, flame retardant

4. Insertion loss: the average ≤0.2dB, MAX≤0.4dB

5. Return loss: ≥50dB

6. No need epoxy or polished, field-installable, factory embedded fiber