Wholesale One-Piece Colostomy Bag Ostomy Disposal Colostomy Bag Open

Product description

1. Wipe the stoma and its surrounding skin with warm water and dry, remove the sclerotic keratinised skin and stain, keep the skin around the stoma clean and dry.
2. Measure the size of the stoma with the measuring card supplied. Do not touch the stoma with your fingers while measuring it.
3. According to the measured size and shape of the stoma, cut a hole of an appropriate size on the film of the ostomy flange.The hole diameter is usually 2mm bigger than the stoma diameter.
4. Peel the protective release paper on the inside ring of the flange and stick aiming at the stoma(It is good to blow air into the bag before sticking, in order to prevent thin films from sticking to each other), and then strip the protective release paper on the outside ring, and carefully paste up from the middle towards the outside.
5. In order to make stickup secure(especially in areas and seasons with low temperature), you should press the pasted part with your hands for several minutes, in turn, the hydrocolloid flange could increase viscosity with the rising temperature.

Instructions of a strapping tie

1. Fold the bag opening upwards
2. Roll a strapping tie upwards for 3 to 4 circles
3. Fold both sides of a strapping tie inward

​​

Company introduction

Shuanghui Packaging Division, established in 2004, is one of the ten strategic business units of Shuanghui Development. The annual sales capacity of packaging products exceeds 100,000 tons. The Division is the design, R&D and production base of packaging materials for Shuanghui. Business covers PVDC resin synthesis, plastics processing, printing, multi-layer laminating film, multi-layer co-extruded film, carton processing and so on.

Shuanghui Packaging Division is entitled as the largest PVDC high barrier flexible packaging materials production base in China. We are equipped with more than 200 sets international advanced equipment, a national inspection center and five professional testing laboratories.

Shuanghui Packaging Division is the first group authorized by QS inspection of food packaging in China, and certified with ISO9001 and ISO14001 quality authorization. All the raw materials comply with the directives of the USA, Japan, EU or China. The current products cover PVDC sausage casing film, PVDC thermoforming film, PVDC bag, PVDC co-extruded film, Printed laminating film, PA/PE thermoforming film, EVOH film, Stand up pouch, Polyamide sausage casing, Al-wire and so on. The total products are more than 1,000 categories.

FAQ

Q1:Are you manufacturer or trading company ?

A1:We are both. Our factory is locat in henan province , which is the largest high bamer fod packaing film manufacturer in China wih more than 30 years experience of flm making and supplying for meat processing tactory

Q2:When can I get the quotation ?

A2:Please provide us following info to get an accurate quotation:Size(width *thickness),quantity, application.

Q3: Can I get a sample ?

A3:Yes, we'll be glad to provide sample for free, but appreciate your help with freight cost.