Hot Melt Glue – EVA, PO & PA Types

Features:
1.Hot melt glue is also called hot melt adhesive is widely used in air filters and oil filters for bonding, shaping and assembling in the production process.

2. hot melt glue is environmental protection and fast curing, which can increase production efficiency. Different filter applications have different requirements for the characteristics and materials of filter hot melt glue. Commonly used filter hot melt glue include EVA, PO (Polyolefin), PA (Polyamide), etc. And PA hot melt glue is especially used for oil-resistant and high-temperature filtration.

Color: white

1.The product is a polymerized heat with 100% solid content molten adhesive, used as a solid state at room temperature

2. 100% solid content, green and environmental protection Good adhesive properties for the filter element origami Lower adhesive temperature Better processing performance.

3.No partition plate suitable for purification or other works Air filter molding, bonding and reinforcement

Softening Point

(GB/T-15332) 110±5℃ viscosity /180℃ (GB/T-2794) 3500±800cps curing time

Instructions for using:

Hotmelt tank: 140-160℃；hose:130-150℃； gun:120-135℃

Storage:

1. Store them in a dry, cool place and avoid them Direct sunlight, with a storage period of two years

2. Do not mix them with other adhesives

3. Wear personal protective equipment when operating

4. to prevent high equipment Warm scald Advanced first use

5. to avoid long-term glue in high temperature Stay and aging failure Please sure the bonding substrate surface is not contaminated

6. To achieve a good bonding effect Long time shutdown should be timely emptied and washed machine.

7. The product color will depend on the raw material batch Slightly different, but will not affect the usability ability

FAQ