12 Stations Spin-On Oil Filter Dry Leakage Tester

Technical Parameter

1. Type: Auto Rotary Feeding, discharging, Dry leak Testing by air pressure sensing Usage

2. Leak Testing of oil filters Power Supply:220/380V 50/60Hz

3. 4 Phase Main Air Pressure: Over 6kgf/m³

4. Air Pressure in testing: 4- 5 kgf/m³

5. Testing Capacity: 20 pcs/min.

6. Available Filter Range Diameter :Ø60 - Ø105 ( customized)

7. Height 65mm - 180mm

8. Filter Clamping: Patented Downward Clamping

9. Leakage Detection One Cycle: 30 sec.

10. Detection Range: Over 0.5 cc / 10 sec.

11. Loading / Discharging Full Automatic

Features

1. The equipment will be capable of dry leak testing Spin-On type filters with diameter 65 – 105mm height 65 – 180mm fully automatically without any operators in attendance.

2. The equipment will be capable of receiving a Spin On filter from a continuous flow slat conveyor with the open end down, placing the filter into the test machine, conducting a leak test to the specification and ejecting the filter assembly from the machine onto an output slat conveyor without any damage or scuffing to the product.

3. Any filter assemblies that fail the leak test will be ejected from the machine onto a separate holding station for inspection and re-testing. The equipment will include systems which minimise the set up time required to change from one job to another.

4. The equipment shall run fully automatically without any direct labour once set up. Leak testing example : The machine is capable of pressurising the filter assembly to 600 kPa with air, maintain this pressure for 10 seconds whilst checking the filter leakage rate. The maximum allowable leakage is 0.5cc within the 10 second period at 600 kPa air pressure.