Five Heddle Woven Stainless Steel Wire Cloth

Five Heddle Weave Wire Mesh offers a rectangular opening, is fabricated by passing every warp wire alternately up and down each single and four Shute wires and vice versa. The pattern is staggered on successive warp wires, providing a facade of parallel diagonal lines. This weave permits the use of comparatively heavier wires in the specific mesh count than recommended in other weaves. It is extensively used in supporting the heavier loads. Five-heddle weave mesh offers excellent flow rate, it's suitable for high mechanical pressures.

Material: SS304, SS304L, SS316, SS316L. Pure metal, heating alloy, nickel alloy materials are available.

Weave Type:

Each warp wire alternately goes under and above each one and four weft wires, and each weft wire goes under and above each one and four warp wires alternately.

Features:

It is feasible to produce open meshes with high flow rates and superior mechanical stability. Simultaneously, it offers a smooth surface for easy eradication of produced cake and convenient cleaning of filter cloth.

Applications:

Five Heddle Weave Mesh is used as pressure and vacuum filters and filter candles. Commercial woven wire mesh is used in the petroleum filtration in the chemical houses. It is suitable for drum filter equipment and disc filters where the filter cake removal and cleaning is done in the continuous cycles. It is used in the mining industry, waster water processing and processed water filtration. The smooth surface on one side is commonly used in the petroleum and chemical filtration industries.

Specifications

Standard Width: 1.0m or 48"

Standard Length: 30m or 100ft

Other size according to your requirements.

Packing: wrapped with moister-proof paper, then in wooden cases.