Stainless Steel Plain Dutch Weave Wire Mesh
As a derivation of plain weave, the mesh of main wires is broad, and the cross wires stick together closely, letting liquids or air pass through the intersections of the main and cross wire. This net is best suited for filtering dehydration, and separation of centrifugal separators. Mesh is indicated by the number of weft wires between a distance of 25.4mm. The Dutch Weave is produced by the use of coarse mesh (mesh wire, woven wire mesh, wire mesh basket) in the warp and a fine mesh with relatively smaller wire in the fill. This weave results in greater strength with very fine openings and is primarily used as a filter cloth. The shape and position of the openings aid particle retention and increase filter cake formation.

Characteristics:

1. Warp wire has bigger dia than shute wire
2. Shute wires are possibly bound close to each other
3. High accuracy
4. Nominal or no pressure loss while filtration
5. Supreme filtration surface
6. More stable than square and rectangular wire mesh

Features:

Stainless Steel Dutch Woven Wire Cloth offers good wear-resistance, heat-resistance, acid-resistance and corrosion resistance.

Material: Stainless steel 200series, 300series, 400series.

Other availble materials: nickel, monel metal, phosphor bronze, etc.

Weaving Methods: Plain Dutch Weave("Warp×Weft" same meaning to "Warp×Shute")

Application:

Used for filter or sieve, such as fuel filter, vacuum filter, and the filtration of cast film machine, sewage treatment;
Serve in petroleum, aerospace, metallurgy, food, medicine industries;
Conveyor belts for washers, dryers and sludge presses.

Specifications

Roll Width: 0.2m-1.6m

Roll Length: 10m, 20m, 30m; 100ft

Common Specifications of Plain Dutch Wire Mesh

Packing:Stainless steel wire mesh is packed in rolls,winding on a paper tube,wrapped in moisture-proof paper or plastic film, outside wooden cases or wooden pallet.