Stainless Steel Twill Weave Wire Cloth
Twill Weave Wire Mesh: Each weft wire passes alternately over two, and then under two successive warp wires and each warp wire passes alternately over two and under two successive weft wires. It is possible to be used to allow a heavier than standard wire diameter.
400 mesh twill weave stainless steel wire mesh including 400 wires and openings per inch. Using 0.001" diameter wire, by twill weaving, woven 400 mesh opening for 0.038mm liquid or gas filter. This wire diameter and mesh with ratio reasonable, therefore weave structure is very strong. After 13 whole weaving process, so that the mesh surface flatness better.
Mesh | Weave Pattern | Wire Diameter | Aperture | Open Area Rate | ||
mm | Inch | mm | Inch | % | ||
400 | Twilled Weave | 0.025 | 0.001 | 0.038 | 0.0015 | 36 |
1) Roll Size Roll Width: 36”, 48”, 1.0m Roll Length: 100ft, 30m 2) Cut in Pieces Rectangle shape, square shape, round shape and other required shapes and sizes. |
Materials: SS316, SS316L
316 stainless steel: Similar properties to 304ss but is stabilized by the addition of Molybdenum for increased resistance to chemical corrosion.
316L stainless steel: Similar properties as 316ss but lower carbon content to permit better welding.
Weaving Type: Twill weave
Characteristics: Flat surface, no fault .The performances of acid resisting. Alkali-resisting.heat-resisting and wear-resisting, etc.
Applications: Are widely used in environmental protection, pharmaceutical industry, chemical industry, food industry, mechanical industry, smelting industry, coal mining, paper making, cement, construction industry, aeronautics and astronautics and so on.
Specifications:
MESH Count | Diameter of Wire | Width of Opening | Open Area | Weight | ||
% per | Pounds | |||||
per Inch | Inches | mm | Inches | mm | 100 Sq. Ft. | per 100Sq.Ft |
12 x 12 | 0.032 | 0.81 | 0.051 | 1.3 | 37.9 | 78.8 |
14 x 14 | 0.028 | 0.71 | 0.043 | 1.1 | 37 | 70.4 |
16 x 16 | 0.023 | 0.58 | 0.04 | 1 | 39.9 | 54.3 |
20 x 20 | 0.021 | 0.53 | 0.029 | 0.74 | 33.6 | 56.6 |
30 x 30 | 0.015 | 0.38 | 0.018 | 0.47 | 30.3 | 43.3 |
35 x 35 | 0.014 | 0.36 | 0.015 | 0.37 | 26 | 44 |
40 x 40 | 0.012 | 0.31 | 0.013 | 0.33 | 27 | 36.9 |
50 x 50 | 0.011 | 0.28 | 0.009 | 0.229 | 20.3 | 38.8 |
50 x 50 | 0.0055 | 0.14 | 0.015 | 0.37 | 52.6 | 9.7 |
60 x 60 | 0.011 | 0.28 | 0.0057 | 0.144 | 11.6 | 46.6 |
60 x 60 | 0.0045 | 0.114 | 0.012 | 0.31 | 53.3 | 7.8 |
80 x 80 | 0.007 | 0.178 | 0.0055 | 0.14 | 19.4 | 25.1 |
100 x 100 | 0.005 | 0.127 | 0.005 | 0.127 | 25 | 16 |
120 x 120 | 0.0042 | 0.107 | 0.0041 | 0.105 | 24.6 | 13.6 |
120 x 120 | 0.004 | 0.102 | 0.0043 | 0.11 | 27 | 12.3 |
150 x 150 | 0.003 | 0.076 | 0.0037 | 0.093 | 30.3 | 8.7 |
180 x 180 | 0.0025 | 0.064 | 0.0031 | 0.078 | 30.3 | 7.2 |
200 x 200 | 0.0025 | 0.064 | 0.0025 | 0.064 | 25 | 8 |
200 x 200 | 0.0023 | 0.058 | 0.0027 | 0.069 | 29.2 | 6.8 |
270 x 270 | 0.0016 | 0.041 | 0.0021 | 0.053 | 32.3 | 4.4 |
300 x 300 | 0.0015 | 0.038 | 0.0018 | 0.047 | 30.3 | 4.3 |
325 x 325 | 0.0014 | 0.036 | 0.0017 | 0.043 | 29.7 | 4.1 |
400 x 400 | 0.001 | 0.025 | 0.0015 | 0.038 | 36 | 2.6 |
Packing:
Other specifications according to your requirements.