1. Company Profile

CXFIRE is the largest fire trucks manufacturer in China. Established in 1963. The main manufacturing base is located in Chengdu of Sichuan Province with an area of 200,000 square meters and 600 staff members. More than 1000 units fire trucks are produced and sold every year.

2. Germany MAN Smoke Exhaust Special Fire Fighting Truck with Water Tank

3. Superstructure

3.1 Compartment

• Material: High-strength aluminum alloy profiles (Never Rust)
• Structure: Aluminum alloy welded structure. Roof railing with LED light. With aluminum alloy ladder in the rear.

3.2 Roller Shutter Door

• Material: Aluminum alloy profiles with anodized surface.
• Structure: With rain-proof groove on the top, lever-type bar, lock handle, pull strap, two-point fixed seat, LED light and sensors.

3.3 Foot Pedals

• Material: High quality aluminum alloy.
• Structure: 50cm width, bear more than 300kg, anti-slip design, with double lock function. Mounted on the both sides of compartment.

3.4 Superstructure Electric Appliance

• Warning Light and Siren: Long-row warning light and siren are mounted above cabin. The controller is installed in the driver's cabin.
• Strobe Light: Mounted on the both sides of the compartment.
• External Lighting: LED lights are mounted on the both sides of the compartment.
• Roof Lighting: LED lights are mounted on the inside of the roof.
• Side Indicator Light: Inline yellow warning light is mounted on the side of the compartment and pedals.

• Brand: Cummins
• Model: L375
• Maximum power: 375 horsepower

• Overall structure: The main smoke exhauster is installed on the lifting mechanism, driven by an independent engine, and the maximum height is ≥5m (the highest point is above the ground).
• The maximum flow of positive pressure smoke exhaust: 504000 m3/h
• Air supply distance: ＞100m (when there is no wind or downwind)
• The farthest spray distance of water mist: ≥60m (when there is no wind or downwind)

• Two sets of positive and negative pressure rotary fans; driven by an efficient hydraulic system
• Can realize fast switching between positive and negative pressure
• The two systems can work independently
• Maximum air volume per set: 50000 m3/h

• Fire pump model: CB10/20
• Rated pressure: 1.0MPa
• Rated flow: 20L/s
• Drive form: hydraulic drive

• Maximum lift: ＞2.5 tons
• Maximum lifting height: ＞5m (the highest point is away from the ground)
• Lifting speed: 7 m/min
• Rotation angle: 360°
• Pitch angle: -10°～30°
• Rotational angular velocity: 360°/min
• Installation position: The fan is installed on the revolving and hydraulic lifting platform and can be sprayed at any position

• Capacity: 1500L of water, 500L of high expansion foam
• Material: stainless steel
• Installation form: liner type