Characteristics :

- It has the characteristics of uniform water flow, no dead ends, good light conditions, thorough sterilization, low energy consumption, and flexible and convenient installation.

- The main body is made of stainless steel, and there is no metal ion infestation problem. The product structure is a closed container quartz sleeve type with an electric control device inside. Among them, the key mask lamp management theory has a lifespan of up to 8,000 hours, The product has beautiful appearance, compact structure, convenient operation and maintenance.

- The sterilization efficiency can reach 99%-99.9%. The sterilization time of UV technology for several common bacteria** generally only takes less than 1 second. Traditional chemical disinfection methods such as chlorine and ozone generally require 20 minutes to 1 hour to achieve the UV C sterilization effect.

Technical parameters :

The distance between the conveyor belt and the ground: 750±20mm

Ultraviolet light source effective light length 600mm

A total of 16 lamps are installed in the sterilization machine, each with a power of 20w. The ultraviolet lamps are inside, up, down, left, and right.

Instructions :

Outer body of working area tunnel: 1.2mm stainless steel set

Inner cavity of working area tunnel: a set of 1.0mm stainless steel plate

Body support frame: a set of Fangtong steel

Air transport system: a set of forced air transport combined exhaust fans (exhaust harmful gas)

Conveyor belt: Teflon

Conveying roller: clean friction-resistant roller

Mesh belt inorganic speed regulation range: 0-5m/min

Transport motor: 800W (frequency converter speed regulation)

Speed governor: 500W (stepless speed regulation)

Main switch: 20A

Total power: 2.5KW

Working voltage: 200V--220V(±5), three-wire system, 50Hz