Wire Testing Equipment High Power Wire And Cable Withstand Voltage Tester
1. Wire Testing Equipment USES:
Suitable for high voltage test of motor, household appliances, instruments, electronic devices, insulation materials, and wires and cables. When the power frequency withstand voltage test of wire and cable is carried out, because of the large capacitance between the electrodes and the large capacitance current when the processing frequency voltage is applied, a large capacity transformer is needed. The larger the cable, the longer the cable and the larger the capacitance, the greater the transformer capacity required. When the maximum test voltage of the press is 5kV, it can withstand capacitance current below 5A, and the capacity can reach 25kV.
2.Technical parameters:
Input voltage | AC 220V 50Hz |
Accuracy | ± 5% |
Transformer capacity | 25kVA |
Output current | max. 5A |
Action current | set five gears 1A, 2A, 3A, 4A and 5A |
Test time | 1~999s adjustable |
Overall dimension | 800 ×700 × 1650mm |
Output test voltage | AC 0~5kV 50Hz |
3. Service conditions:
1. The altitude shall not exceed 1000m.
2. The ambient humidity shall not exceed+40 ° C and not be lower than - 10 ° C.
3. The maximum relative humidity of the air is 85%.
4. It should be installed in a place without explosive gas, rain and snow, strong vibration and dryness.