Luminaries Testing Equipment IEC60598-2-21 Cold Bending Test Device
IEC 60598-2-21 21.7 Cold Bending Test Device
Product Introduction:
It is required to be used with a low-temperature test box to test whether the wire or rope lamp has cracks when it is wound at low temperature.
The lamp is wound on the appliance shown in Figure 2, with a winding diameter of 4-5 times its own diameter, and then placed in the environment of -15℃ plus or minus 2℃ for 16 hours. The number of winding turns is 2, and the rope lamp should be undamaged.
Standard:
This test device is designed according to the requirements of IEC60598-2-21 standard.