L17 Series, oil-fog lubricator, 1-1/2" NPT ports

>All around (360°) visibility of the sightfeed dome simplifies installation and adjustment

> Screw-on bowl reduces maintenance time

> Can be disassembled without the use of tools or removal from the air line

> Flow sensor design provides a nearly constant oil/air ratio over a wide range of air flows

Technical data

L17

Fluid: Compressed air, neutral gases

NOTE: Contact technical support for use with other media.

Maximum pressure: 250 psig (17 bar)

Operating temperature*:

0° to 175°F (-20° to 80°C) * Air supply must be dry enough to avoid ice formation at temperatures below 35°F (2°C).

Start point (minimum flow required for lubricator operation):

8 scfm (3.8 dm3/s) at 90 psig (6.3 bar) inlet pressure 1" ports: 275 scfm (130 dm3 /s)

Reservoirs:

1 pint (0.5 liter)

1 quart (1 liter)

2 gallon (8 liter)

5 gallon (20 liter)

Materials

Body: aluminum

Reservoirs:

1 pint: aluminum

1 quart: aluminum

2 and 5 gallon: steel reservoirs that are ASME rated according to the ASME Pressure Vessel Code, Section VII

Ordering information

Models listed have PTF threads

** Models listed in the order table must not be located downstream of frequently cycling directional control valves. Order the optional bi-directional Oil-Fog Lubricator for use under such conditions. † Typical flow with 90 psig (6.3 bar) inlet pressure and a pressure drop of 5 psig (0.35 bar).

After-sales clause:
One year quality guarantee Policy
We will check the goods quality before shipment. If there are some

unexpected problems
happen, we hope to solve the problems with buyer through friendly in the

following ways:

1, If it is quality problem, buyer can submit argue within 15days after

receiving the goods,
buyer must provide photos or video and other evidence to seller for

identify.
2, Man-made damaged, buyers take full responsibility.
3, Product quality processing program:
1) The buyer return the products for bad quality reasons for one year

(not included those

damages coursed by shipping or Man-made damaged ).

A 15% restocking fee is assessed for any products returned in "used" condition. And then we will send a new
product to buyer and pay for the resend shipping cost.
2) If the goods (total price including shipping is less than 10USD) has quality problems, we
will resend a new product in buyer next order; if buyer don't plan to make a new order in
the near term, buyer can pay the resend shipping cost and ask to resend a new product. If
there is an issue with the products, please contact us– we will solve it as soon as we get.

If you have any other question, welcome contact us.