0805 / 2012 , 1/8W Low noise Low TCR Thick Film SMD Chip Fixed Resistor
We can make un-common product per customers requirements.
Features:
* Size: 0805
* Resistance Range: 0.1 ~100M Ω
* Resistance Tolerance: ±5%; ±1%
* High power, Compact, Higher-range resistors - for reflow
* Temperature Coefficient ± 100, ± 200
* Operating Temperature -55 degree~125 degree
* Packing: 5000PCS/reel, tape and reel
* Miniature and Light weight
* Suit for reflow and wave flowsolder
* Stable electrical capability. High reliability.
* Low assembly cost, suit for automatic SMT equipment
* Superior mechanical and frequency characteristics
* RoHS compliant
* Advanced thin film technology
* Very tight tolerance down to +-0.01%
* Miniature size 0201 available
Applications:
Widely and largely used in the Electronic, Electronical and Information Industries.
Medical Equipment
Testing/Measurement Equipment
Printer Equipment
Automatic Equipment Controller
Converters
Communication Device, Cell phone ,GPS ,PDA etc...
APPEARANCE:
* The surface of reistor is covered with Protective Coating which hard to fade, and the surface of coating should avoid uneverness.
* The terninal part is covered equable, the plating is hard to fade, and should avoid unevenness,flaw, pinhole and discoloration.
* With a clear mark, the resistor body is crack-free.
Reference Standard:
GB/T 57296-2003
GB/T 9546-1995
Packing:
TYPE | TAPING | QTY/REEL | A±0.5 | B±0.5 | C±0.5 | D±1 | M±2 | W±1 |
0201 | PAPER | 10,000PCS | 2.0 | 13.0 | 21.0 | 60.0 | 178 | 10 |
0402 | PAPER | 10,000PCS | 2.0 | 13.0 | 21.0 | 60.0 | 178 | 10 |
0603 | PAPER | 5,000PCS | 2.0 | 13.0 | 21.0 | 60.0 | 178 | 10 |
0805 | PAPER | 5,000PCS | 2.0 | 13.0 | 21.0 | 60.0 | 178 | 10 |
1206 | PAPER | 5,000PCS | 2.0 | 13.0 | 21.0 | 60.0 | 178 | 10 |
1210 | PAPER | 5,000PCS | 2.0 | 13.0 | 21.0 | 60.0 | 178 | 10 |
2010 | PAPER OR EMBOSSED | 4,000PCS | 2.0 | 13.0 | 21.0 | 60.0 | 178 | 13.8 |
2512 | EMBOSSED | 4,000PCS | 2.0 | 13.0 | 21.0 | 60.0 | 178 | 13.8 |
Performance Test:
Test Item | Test Condition | Performance |
Temperature coefficient | Test the resistance value at normal temperature and normal temperature added 100℃,calculate per℃ resistance value change rate . | ±100ppm/℃ |
Short time overload | 2.5 × rated voltage or Max.overload voltage (get the lower) for 5 seconds. | ΔR≤±(0.5%R0+0.05Ω) |
Pulse overload | At 4 × rated voltage or Max. pulse overload voltage (get the lower) cycle 10000±200 times(1 second on, 25 seconds off ). | ΔR≤±(1%R0+0.05Ω) |
Resistance to soldering heat | Immerge into 350±10℃ tin stove for 2~3 seconds. | ΔR≤±(0.5%R0+0.05Ω) |
Solderability | Immerge into 245±3℃ tin stove for 2~3 seconds. | The area of soldering is over 95% |
Temperature cycling | At -55℃ for 30 min, then at +25℃ for 10~15 min, then at +125℃ for 30 min, then at +25℃ for 10~15 min, total 5 cycles. | ΔR≤±(0.5%R0+0.05Ω) |
Load life in humidity | Overload rated voltage or Max.working voltage (get the lower) for 1000 hours (1.5 hours on and half-hour off ) at the 40±2℃ and 90~95% relative humidity. | ΔR≤±(2%R0+0.05Ω) |
Load life in heat | Overload rated voltage or Max.working voltage (get the lower ) for 1000 hours (1.5 hours on and hal |
Contact: Angel Sun
Tel: +86-13528847020
Email: Admin@winsunhk.cn
Skype: Angelsun618
Whatsapp: 13528847020
Wechat: 13528847020
QQ: 553695308