Climate Chamber Constant Temperature Environmental Constant Temperature Humidity Climatic Test Chamber
Uses:
Thermal shock test chamber is suitable for high and low temperature shock test of electronic components and materials. Thermal shock test chamber is perfect test equipment for electronic components, metals, chemical materials, automation components, communication modules, defense industry, aerospace industry, BGA, PCB substrate, electronic chip IC, semiconductor ceramics and polymer materials for automotive industry, aircraft industry, electronics, materials, laboratory calibration, university research.
Characters:
1. The most advanced latest and European style explosion-proof handle, perfect shape design, high quality appearance.
2. Large LCD touch screen
3. impact by changing the air grille to pull the hot and cold temperature into the test area for forced testing.
4. Impact time: 0.1~999.9 hours; cycle time: 1~9999 times, can be set.
5. Various temperature ranges and humidity ranges
6. 50mm diameter test holes on both sides of the test chamber, which can be connected with external power or signal lines
7. Adopt high efficiency repetitive compression refrigeration unit imported from Europe and America, low noise and energy saving.
8. Adopt PID automatic calculation control, high precision of temperature control.
9. Automatic cyclic shock or manual selective shock can be carried out, and two-slot or three-slot cold and heat shock can be selected.
10. Use environmental protection refrigerant R404, R23, no pollution to ozone.
Specifications:
Test dimension | 46×46×46cm | 56×66×56cm | 68×68×65cm | 80×80×76cm
|
Shelves dimension | 36×36cm | 46×56cm | 60×60cm | 70×70cm |
Temperature range | High temperature zone:normal~+150°C | |||
Low temperature zone:normal~-60°C
| ||||
Hoting&cooling speed | 1.5°C per minute average | |||
Temperature fluctuation | less than ±0.5°C | |||
Temperature deviation | less than ±2°C | |||
Temperature conversion time | less than 10s
| |||
Temperature recovery time | less than 5min | |||
Impact method | cylinder conversion
| |||
Materials | external materials:SUS#304 stainless steel
| |||
Internal materials: SUS#304 stainless steel | ||||
Cooling system | water-cooled or air-cooled, Taikang compressor in Franch, environment friendly refrigerant
| |||
Controller | programmable temperature controller in Japan | |||
Standard accessories | view windows, cable hole, lighting devices | |||
Design standard | GB/GJB/IEC/MIL | |||
Power | 7.5KW 12KW 26KW 15KW AC380V/50Kz, three phase | |||
Remarks | It can customize by customer demands. Technology index refer to product description. |
About us:
1. who are we?
We are based in Guangdong, China, start from 2018,sell to South Asia(20.00%),Eastern Asia(20.00%),Domestic
Market(15.00%),Southeast Asia(15.00%),Eastern Europe(10.00%),North America(10.00%),Oceania(5.00%),Western Europe(5.00%). There are total about 11-50 people in our office.
2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
3.what can you buy from us?
Industrial Machine, Vending machine, Fire Testing Equipment, Environmental Test Chamber, Textile Testing Equipment, Toys Testing Equipment, Wire and Cable Test Machine
4. why should you buy from us not from other suppliers?
We are a high-tech enterprise which is specialized in developing and manufacturing Fire Testing Equipment, Building Material Fire Tester, Wire and Cable Fire Tester, Environmental Test Chamber, Textile Testing Equipment, Toys Testing Equipment and etc.
5. what services can we provide?
Accepted Delivery Terms: FOB,CFR,CIF,EXW;
Accepted Payment Currency: USD, EUR, JPY, AUD, HKD, GBP, CNY;
Accepted Payment Type: T/T,L/C,D/P D/A, Credit Card, Western Union, Cash;