Product Description
The salt spray tester is used to test the corrosive resistance of products whose the surface was treated with paint, electroplating, inorganic and organic film, anode handling, anti-rust oil, etc.
Specification
Internal Dimension W*H*D(mm) | 600*450*400 |
External Dimension W*H*D(mm) | 1100*600*1200 |
Lab Capacity(L) | 108 |
Saline Capacity(L) | 15 |
Enter./Inter.Material | P.V.C&P.P |
Compressed Air Pressure(kgf) | 1.0-6.0 |
Weight(kg) | 65 |
Power Source | 220V 60/50HZ |
Structure:
1. The Salt Spray and Salt Fog Corrosion Test Chamber cover is made of transparent materials so that the operator can see the tested sample in the chamber and the spraying situation of the tested sample.
2. A waterproof structure is adopted between the chamber cover and chamber body and thus there is no salt spray overflow.
3. Adopts the tower spraying system and equipped with the salt solution filter system and non-crystal nozzle so as to realize even salt spray distribution and freely adjustable settlement.
Features:
1. The whole PP&PVC solid mechanical structure is hydrochloric acid resistant, heat resistant, never aging, suitable for salt spray copper acetate, etc.
2. Patented nozzle and conical diffusion device make the falling mist quickly and evenly. With manual level automatic control mode, the maximum setting time can reach 9999 hours.
3. With automatic defogging device, which can be cleared to observe the tested products after the experience is over.
4. three complete sets of temperature control system (saturated air temperature, cabinet temperature, test liquid temperature) to ensure consistency and standardization of the test.
5. Economical push-button controller and programmable touch screen controller are available.
6. Salt spray test conditions are set according to IEC 68-2 11, DIN EN ISO 9227, ASTM B117, JIS Z2371, JIS K5400 and other relevant test standards.
salt mist fog testing machine with universal wheel for paint corrosion test