Straight Seam Pipe/t​ube High Frequency Solid State Welding Machine

Introduction:
Uhf induction heating equipment is mostly used for surface quenching of industrial metal parts, which is a metal heat treatment method that generates a certain induction current on the surface of the workpiece, rapidly heats the high frequency surface of the parts and then rapidly quenches. Ultra-audio induction heating equipment, that is, the workpiece induction heating for surface hardening equipment.

Applications:

1 Shafts and gears are hardened, bores are quenched, and the quenching depth is up to 2mm or less.
2.Carbon steel screws and stainless steel screws are heated and glued.
3. Sawtooth continuous hardening, annealing or quenching of stainless or alloy steel wire.

4.Carbide sawtooth welding, cross to welding, communication cable connector welding, filter capacitor welding.

5.Welding of metal pipe joints, continuous welding of globe valves.

Major Features

1. This equipment adopts Soft-switch ultrahigh frequency technology and two poles closed loop control technology and our company fully owns the independent intellectual property right.

2. Fluctuating frequency can be 100k-1.5MHZ, effectively control the depth of surface quenching, which can totally replace the high frequency of vacuum tube.

3.It can continuously work for 24 hours and 100% duty cycle.

4. Parts of power devices are all from well-known brand product.

5. Ultra-small size and weigh, high efficency, energy saving and environmental protection with safety.

Major scope of Application

1. Quench for shaft, gear and inner hole of mold, quenching depth can be within 2mm.

2. Carbon steel and stainless steel screw coating.

3. Continously quench for saw blade, anneal and quench for stainless steel,alloy steel thread.

4. Welding for hard alloy saw balde, reamer, communication cable joint and fillter capacitor.

5.Welding for joint of metal tube, and continuous welding of stop value.