1 | Power supply | AC( 220±10% )V, 50Hz. |
2 | Heating device | (1) The furnace is silicon carbide material. Power is 600W. (2) The heating power is adjustable from 0 W to 600W. |
3 | Heating rate | Procedure A: (5~6)℃/min, Procedure B:(1~1.6)℃/min. Automatically controlled |
4 | Stirring device | (1)Stirring motor: BYGH101 stepping motor (2) Driving mode: flexible shaft (3) Shaft size: 8mm×40mm |
5 | Stirring rate | Procedure A: (90~120)RPM, Procedure B: (250±10)RPM |
6 | Igniting device | (1) Igniting source: gas(or other civilian fuels,the same below) (2) Electric ignition. Gas flame diameter:3.2mm~4.8mm |
7 | Temperature testing prob | RTD, PT100 |
8 | Ambient temperature | ≤ 35℃ |
9 | Relative humidity | ≤ 85% |
10 | Maximum power consumption | 650W |
No. | Item | Unit | Qty | Remarks |
1 | Temperature Sensor | Piece | 1 | Pt100 platinum resistance |
2 | Driving flexible shaft | Piece | 1 | Installed by user itself |
3 | Latex tube Ф3 0.5 m | Piece | 2 | |
4 | 5A fuse (Ф5 × 20) | Piece | 2 | |
5 | Burning torch | Handle | 1 |