Environmental Test Chamber For Simulation Temperature Humidity Climatic Test Chamber
Temperature humidity test stability chamber is able to accurately simulate such complicated natural environments as low temperature, high temperature, high temperature and humidity, low temperature and humidity etc., applicable to the QC inspection in such industrial units as electronics, electrical appliance, battery, plastics, food, paper product, metal, chemistry, research institution,university etc..
Features
1. Polished stainless-steel chamber, semicircular arcs at corners for easy cleaning, and the space between the shelves in the chamber is adjustable.
2. Microprocessor controller for temperature and humidity ensures of precise and reliable control Imported compressor.
3. Independent temperature-limiting alarm system ensures experiments run safely.
4. Printer connector and RS485 connector are options which can connect printer and computer to record the parameters and the variations of temperature.(optional)
Environmental Test Chamber Specification:
Model | YYE-036-080 | YYE-036-150 | YYE-036-225 | YYE-036-408 | YYE-036-800 | YYE-036-1000 | ||
Inner chamber size w×h×d(cm) | 40×50×40 | 50×60×50 | 50×75×60 | 60×85×80 | 100×100×80 | 100×100×100 | ||
Exterior chamber size w×h×d(cm) | 90×140×95 | 100×150×105 | 100×165×115 | 110×175×135 | 150×190×135 | 150×190×155 | ||
Testing temperature range | -73℃ ,-60℃,-40℃,-20℃,0℃~150℃,180℃ | |||||||
Performance | Temp.humi.fluctuation | ±0.2℃,±0.5%RH | ||||||
Temp.humi.uniformity | ±1.5℃;±2.5%RH(RH≤75%),±4%(RH>75%)empty load,after stabilization | |||||||
Temp.humi.resolution | 0.01℃;0.1%RH | |||||||
Heating-up time | ℃ | 10 0 15 0 | ||||||
min | 30 40 | 30 40 | 30 45 | 30 45 | 30 45 | 30 45 | ||
Cooling-drow time | ℃ | 0 -20 -40 -60 -70 | ||||||
min | 25 40 50 70 80 | |||||||
Material | Exterior chamber material | Stainless steel+Powder coating | ||||||
Interior chamber material | SUS#304 Stainless steel | |||||||
Insulation material | PU fiberglass wool | |||||||
System | Heating system | SUS#Stainless steel high-speed heater | ||||||
Humidification system | Surface evaporation system | |||||||
Dehumidifying system | ADP critical dew point cooling/dehumidifying method | |||||||
Controlling system | Digital electronic indicator+SSR+PID | |||||||
Other components | Multi-layer vacuum glass observation window,cable port(50mm),controlling status indicator lamp,chamber light,specimenloading shelf(2pcs,position adjustable) | |||||||
Safety protection device | Over-heat protection circuit breaker,compressor overload protection,control system overload protection, humidifying system overload protection indicator lamp | |||||||
Power supply | AC 1 phase 220V;3 phase 380V 60/50Hz |