Four 4 door access controller with software management, TCP/IP network door access control system
Anke Multi-doors access controller receives the information from the reading part and gives the command or signal whether it is permissible or not after analysis and judgment.
WG26, WG34, RS485 and RS232 are used to connect the controller and the reading equipment.
TCP/IP communication is used connect the controller and the management computer to realize the distributed centralized network management.
The controller can be connected with 4 reading devices to control the entry and exit of personnel.
Characteristics
Direct opening function.
Multiple interfaces of WG26, WG34, RS485 and RS232.
Support one-way door opening and two-way door opening.
Technical parameters:
Model | CA-MC0410 |
Working voltage | DC12V |
Power consumption | < 15W |
Size | 77mm (D) *253mm (W) *278mm (H) |
Control access control | 1~4 |
Controller number | 15 |
Signal input | door opening button / door / fire |
Signal output | open signal / alarm signal |
Card storage capacity | Card 20000 |
Record storage capacity | Record 90000 |
Data storage time(power off) | than 10 years. |
Working temperature:-25℃~70℃ | -25℃~70℃ |
Working humidity | ≤ 95%, no condensing |
Communication mode | TCP/IP |