Door access control system Card Reader System Doors Access Control Panel Card Access Controller
Anke Multi-doors access controller receives the information from the reading part and gives the command or signal whether it is permissible or not after analysis and judgment.
The controller can be connected with 4 reading devices to control the entry and exit of personnel.
TCP/IP communication is used connect the controller and the management computer to realize the distributed centralized network management.
WG26, WG34, RS485 and RS232 are used to connect the controller and the reading equipment.
Characteristics
Multiple interfaces of WG26, WG34, RS485 and RS232.
Direct opening function.
Support one-way door opening and two-way door opening.
Technical parameters:
Model | CA-MC0410 |
Working voltage | DC12V |
Power consumption | < 15W |
Card storage capacity | Card 20000 |
Record storage capacity | Record 90000 |
Data storage time(power off) | than 10 years. |
Signal input | door opening button / door / fire |
Signal output | open signal / alarm signal |
Size | 77mm (D) *253mm (W) *278mm (H) |
Control access control | 1~4 |
Controller number | 15 |
Working temperature:-25℃~70℃ | -25℃~70℃ |
Working humidity | ≤ 95%, no condensing |
Communication mode | TCP/IP |