LMV932MM/NOPB Audio Power Amplifier IC Operational Amplifiers - Op Amps Dual Op amp RRIO

1 Features

• Typical 1.8-V Supply Values; Unless Otherwise Noted

• Specifiedat1.8V,2.7Vand5V

• Output Swing

  • – With 600-Ω Load 80 mV from Rail

  • – With 2-kΩ Load 30 mV from Rail

• VCM 200 mV Beyond Rails

• Supply Current (per Channel) 100 μA

• Gain Bandwidth Product 1.4 MHz

• Maximum VOS 4 mV

• Ultra Tiny Packages

• Temperature Range −40°C to +125°C

• Create a Custom Design Using the LMV93x-N With the WEBENCH® Power Designer

2 Applications

• Phones

• Tablets

• Wearables

• Health Monitoring

• Portable and Battery-Powered Electronic Equipment

• Battery Monitoring

The LMV93x-N family (LMV931-N single, LMV932-N dual and LMV934-N quad) are low-voltage, low- power operational amplifiers. The LMV93x-N family operates from 1.8-V to 5.5-V supply voltages and have rail-to-rail input and output. The input common- mode voltage extends 200 mV beyond the supplies which enables user enhanced functionality beyond the supply voltage range. The output can swing rail- to-rail unloaded and within 105 mV from the rail with 600-Ω load at 1.8-V supply. The LMV93x-N devices are optimized to work at 1.8 V, which make them ideal for portable two-cell, battery-powered systems and single-cell Li-Ion systems.

LMV93x-N devices exhibit an excellent speed-power ratio, achieving 1.4-MHz gain bandwidth product at 1.8-V supply voltage with very low supply current. The LMV93x-N devices can drive a 600-Ω load and up to 1000-pF capacitive load with minimal ringing. These devices also have a high DC gain of 101 dB, making them suitable for low-frequency applications.

The single LMV93x-N is offered in space-saving 5-pin SC70 and SOT-23 packages. The dual LMV932-N are in 8-pin VSSOP and SOIC packages and the quad LMV934-N are in 14-pin TSSOP and SOIC packages. These small packages are ideal solutions for area constrained PC boards and portable electronics such as mobile phones and tablets.

Device Information