1 Features
5.5-μA Quiescent Current
Startup Into Load at 0.7-V Input Voltage
Operating Input Voltage from 0.7 V to 5.5 V
Pass-Through Function during Shutdown
Minimum Switching Current 200 mA
Protections:
– Output Overvoltage
– Overtemperature
– Input Undervoltage Lockout
Adjustable Output Voltage from 1.8 V to 5.5 V
Small 6-pin Thin SOT-23 Package
2 Applications
Battery Powered Applications
– 1 to 3 Cell Alkaline, NiCd or NiMH
– 1 Cell Li-Ion or Li-Primary
Solar or Fuel Cell Powered Applications
Consumer and Portable Medical Products
Personal Care Products
White or Status LEDs
Smartphones
3 Description
The TLV61220 device provides a power-supply solution for products powered by either a single-cell, two-cell, or three-cell alkaline, NiCd or NiMH, or one- cell Li-Ion or Li-polymer battery. Possible output currents depend on the input-to-output voltage ratio. The boost converter is based on a hysteretic controller topology using synchronous rectification to obtain maximum efficiency at minimal quiescent currents. The output voltage of the adjustable version can be programmed by an external resistor divider, or is set internally to a fixed output voltage. The converter can be switched off by a featured enable pin. While being switched off, battery drain is minimized. The device is packaged in a 6-pin thin SOT-23 package (DBV).
Device Information
PART NUMBER |
PACKAGE |
BODY SIZE (NOM) |
TLV61220 |
SOT (6) |
2.90 mm x 1.60 mm |