LM2775DSGR Power Regulator IC Switching Voltage Regulators Switch Cap Boost
1 Features
Fixed 5-V Output
200-mA Output Current
Inductorless Solution: Only Requires 3 Small Ceramic Capacitors
Shutdown Disconnects Load from VIN
Current Limit and Thermal Protection
2-MHz Switching Frequency
PFM Operation During Light Load Currents (PFM pin tied high)
2 Applications
USB OTG
HDMI Power
Portable Electronics
3 Description
The LM2775 is a regulated switched-capacitor doubler that produces a low-noise output voltage. The LM2775 can supply up to 200 mA of output current over a 3.1-V to 5.5-V input range, as well as up to 125 mA of output current when the input voltage is as low as 2.7 V. At low output currents, the LM2775 can reduce its quiescent current by operating in a pulse frequency modulation (PFM) mode. PFM mode can be enabled or disabled by driving the PFM pin to high or low. Additionally, when the LM2775 is in shutdown, the user can chose to have the output voltage pulled to GND or left in a high impedance state by setting the OUTDIS pin high or low.
The LM2775 has been placed in TI's 8-pin WSON, a package with excellent thermal properties that keeps the part from overheating under almost all rated operating conditions.
Device Information
PART NUMBER |
PACKAGE |
BODY SIZE (NOM) |
LM2775 |
WSON (8) |
2.00 mm × 2.00 mm |