HCPL-2430-500E HCPL-2430-000E RF Integrated Circuits High Speed Optocouplers 20MBd 2Ch 4mA

Description

The HCPL-2400 and HCPL-2430 high speed opto-cou- plers combine an 820 nm AlGaAs light emitting diode with a high speed photodetector. This combina-tion re- sults in very high data rate capability and low input cur- rent. The totem pole output (HCPL-2430) or three state output (HCPL-2400) eliminates the need for a pull up re- sistor and allows for direct drive of data buses.

The detector has optical receiver input stage with built- in Schmitt trigger to provide logic compatible wave- forms, eliminating the need for additional waveshaping. The hysteresis provides di erential mode noise immuni- ty and minimizes the potential for output signal chatter.

The electrical and switching characteristics of the HCPL- 2400 and HCPL-2430 are guaranteed over the tempera- ture range of 0°C to 70°C.

Features

• High speed: 40 MBd typical data rate

• High common mode rejection:
HCPL-2400: 10 kV/ μs at VCM = 300 V (typical)

• AC performance guaranteed over temperature

• High speed AlGaAs emitter

• Compatible with TTL, STTL, LSTTL, and HCMOS logic families

• Totem pole and tri state output (no pull up resistor required)

• Safety approval

• – UL recognized – 3750 V rms for 1 minute per UL1577

• – IEC/EN/DIN EN 60747-5-2 approved with VIORM = 630 V peak (Option 060) for HCPL-2400

• – CSA approved

  • High power supply noise immunity

  • MIL-PRF-38534 hermetic version available (HCPL-5400/1 and HCPL-5430/1)

Applications

• Isolation of high speed logic systems
• Computer-peripheral interfaces
• Switching power supplies
• Isolated bus driver (networking applications) • Ground loop elimination

• High speed disk drive I/O
• Digital isolation for A/D, D/A conversion • Pulse transformer replacemen