6N136-500E RF Integrated Circuits High Speed Optocouplers 1 Mb/s 3750Vrms
Description
These diode-transistor optocouplers use an insulating layer between a LED and an integrated photodetector to provide electrical insulation between input and output. Separate connections for the photodiode bias and output-transistor collector increase the speed up to a hundred times that of a conventional phototransistor coupler by reducing the base-collector capacitance.
These single channel optocouplers are available in 8-pin DIP, SO-8, and Widebody package configurations.
The 6N135, HCPL-0500, and HCNW135 are for use in TTL/CMOS, TTL/LSTTL or wide-bandwidth analog applications. Current transfer ratio (CTR) for these devices is 7% minimum at IF = 16 mA.
The 6N136, HCPL-2502, HCPL-0501, and HCNW136 are designed for high-speed TTL/TTL applications. A standard 16-mA TTL sink current through the input LED will provide enough output current for 1 TTL load and a 5.6 k pull-up resistor. CTR for these devices is 19% minimum at IF=16 mA.
Features
High speed: 1 Mb/s
TTL compatible
Available in 8-pin DIP, SO-8, widebody packages
Open collector output
Safety approval
Dual channel version available (253X/053X/0534)
Applications
High voltage insulation
Video signal isolation
Line receivers
Feedback element in switched mode power supplies
High speed logic ground isolation
Replaces pulse transformers
Replaces slow phototransistor isolators
Analog signal ground isolation